Got mine today and will have to do the same mod. Did you just cut the cable input to the regulator and fit a pair of Anderson's so you can bypass it?
Sent from my SM-G960F using Tapatalk
I'm using yellow Anderson Sockets for the Solar side of things on my camper, Ok.
So, yes I did cut the wires between the Panel Junction and the Controller and fitted two Anderson Connectors.
So I could join them, as well as isolate the controller. The other twin wire cable from the controller has to be cut also.
I left enough (300mm.) and fitted another grey socket.
That's so I could reconnect with the Anderson Socket on the other end of the lead.
That left me with a cut end with no connector, so I fitted the yellow socket there.
Now I can run the panels straight into the controller on the camper along with another 120W set of panels I already have.
As well as fit the extension lead, not in stock at my local Supercentre Warehouse, after I get to pick it up.
As I understand it, having the controller at the panel is the opposite of ultimate setup configuration.
I was of the understanding that optimum was controller as close to the battery's as possible.
But I'm not a Sparky, so what would I know.
And, yes, having altered the panels. It won't do me any good if something is wrong with the panels.
They'll take one look and just toss them back at me.
So you have to be happy with that, or just put up with the panels the way they are.