Author Topic: Drill Bit/Knife/Chisel Sharpeners Recommendations Please (Read 5332 times)

xcvator · « **on:** March 30, 2017, 06:37:26 PM »

As I've gotten older my skills with oil stones has waned I'm afraid,

so I've decided that a good combination sharpener could be just the ticket.
These are the sort I'm looking at

https://www.bunnings.com.au/ozito-65w-multi-function-sharpener_p6290595

http://www.ebay.com.au/itm/Multi-Sharpener-Electric-PRO-Xceed-96W-Drill-Bits-Chisel-Knife-Scissor-Sharp-/222307014671?hash=item33c287d80f:g:GM4AAOSwZQRYcyAx

http://www.ebay.com.au/itm/Electric-Multi-Function-Sharpener-Tool-Drill-Bit-Knife-Scissor-Chisel-Planer-/121946071744?hash=item1c648d62c0:g:ObYAAOSwoudW6P5b

Any body have any experience with these things, good, bad and ugly, recommendations please

cheers Keith

Redcherokee · « **Reply #1 on:** March 30, 2017, 07:16:43 PM »

These are incredible. Results are truly brilliant, and watching them in use is mesmerising.

https://www.scarysharp.com.au/product-page/wicked-edge-field-and-sport-pro

xcvator · « **Reply #2 on:** March 30, 2017, 07:35:43 PM »

$750-00

I could buy a lifetime supply of new drills and chisels for less than that,
Was thinking more the $40 to $70 range

Redcherokee · « **Reply #3 on:** March 30, 2017, 07:43:49 PM »

Quote from: xcvator on March 30, 2017, 07:35:43 PM

$750-00 I could buy a lifetime supply of new drills and chisels for less than that,
Was thinking more the $40 to $70 range

Ah, but you forget that with this you could go into the sharpening business to recoup the cost.

xcvator · « **Reply #4 on:** March 30, 2017, 07:56:56 PM »

Quote from: Redcherokee on March 30, 2017, 07:43:49 PM

Ah, but you forget that with this you could go into the sharpening business to recoup the cost.

Sorry RC, I've no plans on re-entering the work force at 70 years old

dales133 · « **Reply #5 on:** March 30, 2017, 07:57:30 PM »

The ozito drill sharpners not to bad.
Ive had mine years and it was about 40 bucks

Sent from my SM-N910G using Tapatalk

juniorgc · « **Reply #6 on:** March 30, 2017, 08:01:39 PM »

I was given one (will check brand tomorrow) and the plastic that it relies on for correct angle is crap and never did the right angle. Ozito might be ok but check the build quality.

I have seen some other drill specific sharpeners that I think would be better.

Sent from my iPad using Tapatalk

juniorgc · « **Reply #7 on:** March 30, 2017, 08:03:50 PM »

http://www.ebay.com.au/itm/Am-Tech-F0475-Drill-Bit-Sharpener-Multi-Colour-/371905082964?hash=item5697453654:g:cEUAAOSwmgJY2j2n

Sent from my iPad using Tapatalk

GreyGhost · « **Reply #8 on:** March 30, 2017, 08:10:20 PM »

don't know what diamond stones ike on drill bits never tried it

but find good keep edge on my stainless fishing knives best luck

greyghost

achjimmy · « **Reply #9 on:** March 30, 2017, 08:20:31 PM »

For drills get a drill point gauge and keep a dedicated 6" bench grinder for the purpose well dressed with good wheels that's all you need. For putting an edge on a knife that's dulled you need a guided stone sharpener about $60 bucks depending at a hunting store. It doesn't remove metal like a lot of the shaver type but takes time. Then for keeping the edge on good kitchen knives I use a Fuji diamond lap thing even the wife can keep the edge constantly and takes no skill/time.

austastar · « **Reply #10 on:** March 30, 2017, 08:28:01 PM »

Hi,
For knifes I use the Lansky kit

http://lansky.com/index.php/products/dlx-5-stone-system/

Works for me.

Cheers

Sent from my GT-N5110 using Tapatalk

dales133 · « **Reply #11 on:** March 31, 2017, 06:48:23 AM »

Quote from: juniorgc on March 30, 2017, 08:01:39 PM

I was given one (will check brand tomorrow) and the plastic that it relies on for correct angle is crap and never did the right angle. Ozito might be ok but check the build quality.

I have seen some other drill specific sharpeners that I think would be better.

Sent from my iPad using Tapatalk

Edit: i used it the first time in a while today, its xu1 not ozito

The xu1 one has holes you drop the drill bits into and a beveled stone tbat runs horizontaly inside.
Its cheap and nasty but mine still cuts a good edge.
Having said that im gental with it but ive done alot of drill bits

Sent from my SM-N910G using Tapatalk

stabicraft · « **Reply #12 on:** March 31, 2017, 07:22:35 AM »

I have a lansky and I can shave with my damascas knives.
The stainless knives, not so much, butvstill seriously sharp.

I also use baby oil as a lubricant and oilive oil as a rust preventitive after sharpening.

GBC · « **Reply #13 on:** March 31, 2017, 07:57:00 AM »

Buy a step drill and never sharpen a drill bit again. Get your knives relanded and double beveled by a knife doctor. Look after them and touch them up on a steel. For bulk fish cleaning we use cheap butchers knives and an accu sharp - look them up and keep them away from good kitchen knives. Stuffing about sharpening expensive gear will land you at the knife doctor anyway.

UIZ733 · « **Reply #14 on:** March 31, 2017, 08:10:54 AM »

I have found Ozito stuff very good (for the price) and the warranty is unbeatable. However of the three you listed in the opening post, ONLY the second one can do up to 13mm Dia. drills. The rest are up to 10mm only.
I think you should buy it (No. 2) and do a 'review' for Swaggers. It would be a rewarding experience.

Traveller · « **Reply #15 on:** March 31, 2017, 03:20:01 PM »

I know this is too expensive, but I thought people might be interested in a Russian knife sharpening gizmo, it is like a Lanky on steroids.

Here is a Youtube clip - https://www.youtube.com/watch?v=k3SbEWFSA8s and
here is the website of the store - http://tsprof.com/contacts-block

latestarter · « **Reply #16 on:** March 31, 2017, 04:00:03 PM »

For knives, I use a spyderco kit like this....
https://www.spyderco.com/catalog/details.php?product=77

Works well

achjimmy · « **Reply #17 on:** March 31, 2017, 04:55:21 PM »

Quote from: austastar on March 30, 2017, 08:28:01 PM

Hi,
For knifes I use the Lansky kit

http://lansky.com/index.php/products/dlx-5-stone-system/

Works for me.

Cheers

Sent from my GT-N5110 using Tapatalkÿ

Yep that's what I use too, just couldn't recall the name.

dales133 · « **Reply #18 on:** March 31, 2017, 05:30:06 PM »

I just purchased the lansky kit with the leather strop and diamond attachments as extras.
Expensive for sure but ive got a ton of good kitche knives that need sharpening so its worth it

Sent from my SM-N910G using Tapatalk

Bigfish · « **Reply #19 on:** March 31, 2017, 05:59:03 PM »

Had the Lansky kit for teays. So have my mates. Keeps the filletting knives beautifully sharp.

xcvator · « **Reply #20 on:** March 31, 2017, 06:58:12 PM »

Quote from: UIZ733 on March 31, 2017, 08:10:54 AM

I have found Ozito stuff very good (for the price) and the warranty is unbeatable. However of the three you listed in the opening post, ONLY the second one can do up to 13mm Dia. drills. The rest are up to 10mm only.
I think you should buy it (No. 2) and do a 'review' for Swaggers. It would be a rewarding experience.

I think I'll get the Ozito from the BGS, for $40-00 and 3 years warranty I think it will do what I need. 90% of my drilling is done with a cordless drill so 10mm is the max it will take.
How rewarding would a review be

UIZ733 · « **Reply #21 on:** April 01, 2017, 08:11:56 AM »

Quote from: xcvator on March 31, 2017, 06:58:12 PM

I think I'll get the Ozito from the BGS, for $40-00 and 3 years warranty I think it will do what I need. 90% of my drilling is done with a cordless drill so 10mm is the max it will take.
How rewarding would a review be

I'm sure your generous Victorian Swagger mates will work out something appropriate.😊

News:

Author Topic: Drill Bit/Knife/Chisel Sharpeners Recommendations Please (Read 5332 times)

UIZ733

UIZ733