Do you still need the ropes to hold the pole up that you are using this for. We are looking at getting a 24 x 30 to make it over the camper and my daughters tent
i'll tell you that after we go camping in april to test it out...
i am looking at getting a 24 x 24 tarp, with three 9 foot aluminium supapeg poles at the 'back' of the trailer (nearest the towball), then two 9 foot galvanised poles with the tarp savers on the top on either side of the soft floor door, with 7 foot aluminium poles on the edge, and then another three 7 foot poles on the kitchen edge of the tarp... if that makes sense...
in simpler terms:
3 poles (rear) 9 foot poles
4 poles (middle) inner two being 9 foot galvanised poles with tarp savers on them and outer two being 7 foot poles
3 poles (front) 7 foot poles
all of the tarp outer edge poles will have double guy ropes attached. i am trying to see if i can get away with not having spreaders on the two poles with the tarp savers, and just use the tension created with the other poles...
the rear poles are 9 foot because i need a bit of extra height so the tarp doesn't rest on the rear edge of the camper, but still have enough fall so the rain can come off, if required...