Author Topic: Architects or builders advice wanted  (Read 6251 times)

0 Members and 1 Guest are viewing this topic.

Offline solidute

  • Soft Floor Camper User
  • ****
  • Posts: 282
  • Thanked: 4 times
  • Gender: Male
Architects or builders advice wanted
« on: May 09, 2016, 03:20:32 PM »
I have a walkway on my deck that leads to the backyard that is temporarily half blocked but I need to be able to fully close it off due to the wind and rain that pelts in. Obviously a door is best option but I am stuck on how to design it.

The 2 issues that are stumping me are the sloping roof and the fact that there's a bedroom window right where the door would be making either hinging or latching difficult.

The first pic is from the deck looking out the second is looking along the line at the window.

I want maximum light in as it's a dark area anyway double reason for bedroom window.

One thought was to build an alcove so window is not any different than it currently is. Another option is to extend the roof and deck to be level with the rest of the house and build in a door arrangement then.
I also wanted to have the currently temp blocked off area as another door.

Any ideas please jot them down. This project has gone on long enough and I just can't seem to find a decent solution

Sent from my SM-G930F using Tapatalk
« Last Edit: May 09, 2016, 07:46:18 PM by solidute »

Offline GBC

  • Hard Top Camper User
  • ******
  • Posts: 1984
  • Thanked: 325 times
Re: Architects or builders advice wanted
« Reply #1 on: May 09, 2016, 04:30:44 PM »
As the world's single most lazy builder, I'd be ripping down the tin shed bit and having ally sliders made up in the same colour as the window. Get them made so they just fit under the lowest point of your soffit and butt into the right hand side of the window. Run a head across from the eave to the existing far right post to fix the joinery to.
After that you can box out/flash the little triangle above the window and frame and line above the slider to match the roof pitch then screw on a flashing from the new wall back to the roof to cover the void.
It'll even look like someone meant to do it.
« Last Edit: May 09, 2016, 04:35:54 PM by GBC »

Offline rags

  • Hard Floor Camper User
  • *****
  • Posts: 1116
  • Thanked: 196 times
  • Gender: Male
Re: Architects or builders advice wanted
« Reply #2 on: May 09, 2016, 06:50:08 PM »
I'm trying to work out how you are going turn the house up side down so your deck is at the bottom with roof on top!,!!!
Maybe you can fix the photo

Offline solidute

  • Soft Floor Camper User
  • ****
  • Posts: 282
  • Thanked: 4 times
  • Gender: Male
Re: Architects or builders advice wanted
« Reply #3 on: May 09, 2016, 07:45:18 PM »
Yeah on phone and it wont let me edit them? ???? if you know how im listening ????

Sent from my SM-G930F using Tapatalk


Offline solidute

  • Soft Floor Camper User
  • ****
  • Posts: 282
  • Thanked: 4 times
  • Gender: Male
Re: Architects or builders advice wanted
« Reply #4 on: May 09, 2016, 07:47:34 PM »
Re-inserted it and it worked but left old one there. Can win them all ????

Sent from my SM-G930F using Tapatalk


Offline Cruiser 105Tvan

  • Hard Top Camper User
  • ******
  • Posts: 2239
  • Thanked: 145 times
  • Gender: Male
  • Another Tvan owner.
Re: Architects or builders advice wanted
« Reply #5 on: May 09, 2016, 08:08:02 PM »
Put a decent piece of timber up the wall beside the window on the house wall and hang a door off  that
There should be frame beside the window to anchor to.
Conversely, hang the door from the existing post and close it to the new wood beside the window.
coat of paint and it'll be just like the rest.
Agree with GBC about the roof too.
« Last Edit: May 10, 2016, 03:04:11 AM by Cruiser 105Tvan »
Robert. 
VK3PPC, VZU641.
2000 FZJ105r bars,
HDJ105r Bars F&R, VRS Winch, ATZ. P3's, a cupla 2 ways as well.
and 2009 Canning Tvan pushing.

Offline Rumpig

  • Hard Top Camper User
  • ******
  • Posts: 6053
  • Thanked: 527 times
Re: Architects or builders advice wanted
« Reply #6 on: May 10, 2016, 06:48:28 AM »
I'm guessing you can't put timber on the wall as it lines up part way across that window?
If that is the case, maybe some sort of on wall slider set up running off that centre section might work? Put a lintel of some sort bracketed above the window back to the post, enclose the head area above it and have the door slide back to that centre section when open. You'd have to shape the door edge to suit where it hits the window, not ideal in looks but could work maybe.
It is hard to know exactly would will and won't work just looking at those pics.
« Last Edit: May 10, 2016, 11:45:18 AM by Rumpig »
The smell of bacon proves aromatherapy isn't total bull$/!t

Offline edz

  • Hard Top Camper User
  • ******
  • Posts: 6880
  • Thanked: 926 times
  • Gender: Male
  • " I dont like Sheeple "
Re: Architects or builders advice wanted
« Reply #7 on: May 10, 2016, 08:01:17 AM »
A bit of centerflex hinge,  a couple of good gas rams and a  light ally frame covered with some ACP sheet, hinged from the top section ..push to open and added bonus of being an awning to cover the steps . :D
" IMPROVISE  ADAPT   OVERCOME   and  PERSEVERE  "

Offline cruiser 91

  • Soft Floor Camper User
  • ****
  • Posts: 447
  • Thanked: 34 times
Re: Architects or builders advice wanted
« Reply #8 on: May 10, 2016, 09:12:29 AM »
Zip Track Blind.

Had better look at pic's

Attached blind to roof beam c section. Either under or the face.
2 post to fix channels to if under or possibly 1 post on window side if face fixed.


« Last Edit: May 10, 2016, 09:23:20 AM by cruiser 91 »
Hell's Gate, Worlds End, South Australia.

Offline Cruiser 105Tvan

  • Hard Top Camper User
  • ******
  • Posts: 2239
  • Thanked: 145 times
  • Gender: Male
  • Another Tvan owner.
Re: Architects or builders advice wanted
« Reply #9 on: May 10, 2016, 12:32:44 PM »
It is hard to know exactly would will and won't work just looking at those pics.

A plan or layout view, would help a lot, for where things line up.
Your Local Council could be a problem if you totally enclose that space.
I'm not in your area so You would have to find that one out.
Down here they take a dim view of windows with no access to light. ;D
Maybe a custom security door could help, does it have to be a solid door/gate?
Robert. 
VK3PPC, VZU641.
2000 FZJ105r bars,
HDJ105r Bars F&R, VRS Winch, ATZ. P3's, a cupla 2 ways as well.
and 2009 Canning Tvan pushing.

Offline Redcherokee

  • Soft Floor Camper User
  • ****
  • Posts: 639
  • Thanked: 48 times
Re: Architects or builders advice wanted
« Reply #10 on: May 10, 2016, 12:50:20 PM »
Extend the roof using laser light or similar material to let light in.

Maybe extend the deck too?   I assume that is stairs that go down to the path.

Think outside the deck, and put the door on the path at the end of the house, past the current deck line. Extend roof with laserlight, put in a big window on the other side to keep the light. 

Oh, and Cruiser is probably right about building regs etc, but if you are prepared to remove the extension when you sell we won't tell on you.







Jeep Rubicon SWB 2013. Outback Campers Sturt 2011
4.2L Patrol and Billabong Grove 16 hard roofed camper.

Offline solidute

  • Soft Floor Camper User
  • ****
  • Posts: 282
  • Thanked: 4 times
  • Gender: Male
Re: Architects or builders advice wanted
« Reply #11 on: May 10, 2016, 01:14:29 PM »


A plan or layout view, would help a lot, for where things line up.
Your Local Council could be a problem if you totally enclose that space.
I'm not in your area so You would have to find that one out.
Down here they take a dim view of windows with no access to light. ;D
Maybe a custom security door could help, does it have to be a solid door/gate?

The area im talking about here faces west and the prevailing southerlies and rain that come through this opening make the area uncomfortable most of the year and unusable in the wet hence the need for a "solid" door im open to glass plastic or any suitable material as long as it lets the light in. As for being fully enclosed the north and east sides have plenty of open area.



Sent from my SM-G930F using Tapatalk


Offline Cruiser 105Tvan

  • Hard Top Camper User
  • ******
  • Posts: 2239
  • Thanked: 145 times
  • Gender: Male
  • Another Tvan owner.
Re: Architects or builders advice wanted
« Reply #12 on: May 10, 2016, 01:37:33 PM »
I think Rumpig has it for you.
A slider with a custom sized door panel.
Track on the outside with flashing to cover.
It would put the door closer to the side of the window, instead of over the glass.
The catch could go on the existing post and the catch plate/s could be on the door.
That would keep it fully open, or fully shut, and a stop in/on the track to keep it from hitting the wall/window.
You could run timber up the wall to the underside of the window and fit closed cell foam to the door to take up the gap to the glass.
Would do the job, not sure if the look would be that attractive.
Solid sheet in the bottom half of the door and polycarb or laserlite for the top half beside the window.
Would a double sized security door covered with laserlite bridge that gap. One from large glass patio doors maybe.
Worth a look at your local second hand building supplies yard.  They might have the slider track and fittings too.
Robert. 
VK3PPC, VZU641.
2000 FZJ105r bars,
HDJ105r Bars F&R, VRS Winch, ATZ. P3's, a cupla 2 ways as well.
and 2009 Canning Tvan pushing.

Offline Snapman007

  • Hard Floor Camper User
  • *****
  • Posts: 1097
  • Thanked: 48 times
  • Gender: Male
  • Beer
Re: Architects or builders advice wanted
« Reply #13 on: May 10, 2016, 01:44:13 PM »
Here's one I prepared earlier;



Sliding, adjustable louvres.
Cheers,
Paul

2003 V8 Sahara
2010 Lifestyle Extenda Elite
Great haircut

Offline Cruiser 105Tvan

  • Hard Top Camper User
  • ******
  • Posts: 2239
  • Thanked: 145 times
  • Gender: Male
  • Another Tvan owner.
Re: Architects or builders advice wanted
« Reply #14 on: May 10, 2016, 01:47:04 PM »
Hey Snapman where did you hide the automated opener/closer.
Great looking door.
Robert. 
VK3PPC, VZU641.
2000 FZJ105r bars,
HDJ105r Bars F&R, VRS Winch, ATZ. P3's, a cupla 2 ways as well.
and 2009 Canning Tvan pushing.

Offline Snapman007

  • Hard Floor Camper User
  • *****
  • Posts: 1097
  • Thanked: 48 times
  • Gender: Male
  • Beer
Re: Architects or builders advice wanted
« Reply #15 on: May 10, 2016, 02:00:40 PM »
She's not home ATM. ;D

These are manual adjust only, tilt one leaf and the others follow. Rolls super easy for open/close even after 10 years and this is my primary escape exit to the man shed. Smooth and easy to operate.
Cheers,
Paul

2003 V8 Sahara
2010 Lifestyle Extenda Elite
Great haircut

Offline oldmate

  • Soft Floor Camper User
  • ****
  • Posts: 496
  • Thanked: 1311 times
Re: Architects or builders advice wanted
« Reply #16 on: May 10, 2016, 03:09:15 PM »
Snapman. Have you had a fire at your place mate?
Our Blog. A work in progress
https://www.facebook.com/UltimateAdventuresBlog/

Offline Snapman007

  • Hard Floor Camper User
  • *****
  • Posts: 1097
  • Thanked: 48 times
  • Gender: Male
  • Beer
Re: Architects or builders advice wanted
« Reply #17 on: May 10, 2016, 09:52:08 PM »
No it's a paint color called "smoke haze", a bit fade now after 10 years.
Cheers,
Paul

2003 V8 Sahara
2010 Lifestyle Extenda Elite
Great haircut

Offline oldmate

  • Soft Floor Camper User
  • ****
  • Posts: 496
  • Thanked: 1311 times
Re: Architects or builders advice wanted
« Reply #18 on: May 11, 2016, 05:54:27 PM »
No it's a paint color called "smoke haze", a bit fade now after 10 years.


Creates a nice warm effect mate. I like it
Our Blog. A work in progress
https://www.facebook.com/UltimateAdventuresBlog/

Offline Snapman007

  • Hard Floor Camper User
  • *****
  • Posts: 1097
  • Thanked: 48 times
  • Gender: Male
  • Beer
Re: Architects or builders advice wanted
« Reply #19 on: May 11, 2016, 09:24:02 PM »
Then you'll really like the gable end.  ;D

Once the pool is gone I'll start on the 2016 coat.  :cheers:
Cheers,
Paul

2003 V8 Sahara
2010 Lifestyle Extenda Elite
Great haircut