Author Topic: Drifta package (slide out with return and full length box)  (Read 5742 times)

0 Members and 1 Guest are viewing this topic.

Offline tommo

  • Soft Floor Camper User
  • ****
  • Posts: 257
  • Gender: Male
  • the memorys
Drifta package (slide out with return and full length box)
« on: July 28, 2015, 06:58:28 PM »
Hey fellas

Anybody out there brought one of these kitchens lately? Trying to decide if I should buy one or make one..
Anybody know much about the skids they use on the bottom??

Cheers


Sent from my iPhone using Tapatalk
2005 gu patrol 2009 tambo copper

Offline MarkVS

  • Hard Floor Camper User
  • *****
  • Posts: 1354
  • Thanked: 63 times
  • Gender: Male
Re: Drifta package (slide out with return and full length box)
« Reply #1 on: July 28, 2015, 07:08:52 PM »
I have a drifta full slide out with return. I don't have the slide out box.

They are great, well made, well thought out, and their service is great. .I'm not super handy, so wouldn't have tried to make one.
I believe the skids are a type of nylon strip that's attached to the bottom.


Mark

2020 Patrol Series 5
2015 Complete Campsite Exodus 14

2013,2015,2017 National Meet
Survivor 2013 McGirr Across the Gulf trip
2014 McGirr Cape trip
2016 Duggie Savannah trip
2018 McGirr Kimberley

For every situation you have 3 choices. Live with it, change it, or leave it. But only pick one

Offline tommo

  • Soft Floor Camper User
  • ****
  • Posts: 257
  • Gender: Male
  • the memorys
Re: Drifta package (slide out with return and full length box)
« Reply #2 on: July 28, 2015, 07:11:14 PM »
Thanks for the feed back mark. One question mark does your trailer have any kind of lip on the bottom where your rear barn door closes?


Sent from my iPhone using Tapatalk
2005 gu patrol 2009 tambo copper

Offline tk421

  • Hard Floor Camper User
  • *****
  • Posts: 1050
  • Thanked: 108 times
  • Gender: Male
    • Out of the Office... Road trips round Australia
Re: Drifta package (slide out with return and full length box)
« Reply #3 on: July 28, 2015, 08:23:25 PM »
Anybody's know much about the skids they use on the bottom

Think they're Teflon
“It is good to have an end to journey toward; but it is the journey that matters, in the end.”  - Ernest Hemingway

Offline Cracka

  • Tent User
  • ***
  • Posts: 169
  • Thanked: 12 times
  • Gender: Male
Re: Drifta package (slide out with return and full length box)
« Reply #4 on: July 28, 2015, 08:59:07 PM »
Quoting from the Drifta website under the FAQ's 'Why buy a Drifta drawer', the slide material is "HDPE" (high density polyethylene). 

You can buy the plastic from specialist plastic suppliers.  I have just bought some UHMWPE (ultra high molecular weight polyethylene)
to use as drawer slides in my next project.  The UHMWPE is stronger and more abrasion resistant than HDPE. 

I have used the UHMWPE before, but as a self adhesive 1/32" thick used as slides and they worked great.  A quick spray and wipe off with silicon spray and they are very slippery.
« Last Edit: July 28, 2015, 09:13:00 PM by Cracka »
'14 Mazda BT 50 Freestyle Cab.
Kedron 18' XC3 caravan.
The following users thanked this post: stiffbreeze

Offline Lori

  • Tent User
  • ***
  • Posts: 190
  • Thanked: 13 times
Re: Drifta package (slide out with return and full length box)
« Reply #5 on: July 28, 2015, 09:24:33 PM »
We have a fridge box DPOR with full length pantry drawer. Love it! best thing we added to our camper, space for everything and no need to rummage around in plastic containers like we did when tent camping.

I think it is cheap for what it is, but it is still alot of money.
We werent interested in trying to build our own, we didnt have all the required tools and while we have know how it would still have been a bit of trial and error which would have taken longer and probably required us to buy extra material to replace the pieces we made mistakes on. All though we did not add up the difference I am not sure it would have been worth our while once we factored tools, time, stress, materials..... replacement materials!
The added benefit of not making it is that we supported a company that is unique in the camping scene.

Our camper has no lip near the door.

Offline stiffbreeze

  • Tent User
  • ***
  • Posts: 126
  • Thanked: 5 times
  • Gender: Female
Re: Drifta package (slide out with return and full length box)
« Reply #6 on: July 29, 2015, 12:51:22 PM »
There's a few swaggers here who have used trailer boat sliders for theirs - can get from whitfords, bcf or carac, usually blue in colour. I wasn't sure you could buy the HDPE material or similar so something to suss out - cheers to cracka for that.

I wanted a storage box and a kitchen storage area in my trailer and decided to build it myself - learn the skills (and how not to do it), plus buying more tools is always good. I didn't mind forking out for the tools, wood and supplies because the skills/supplies I've picked up along the way has allowed me to build other stuff as well so saved ourselves cash in that respect.

My trailer has also got a lip so was looking at getting a slider thick enough to sit flush or wedging it at the lip to make it run out smoothly is the idea. Haven't found anyone else on here that has had the same problem so if anyone got ideas?

Drifta is by far a brilliant company and their products are amazing - well built and brilliant customer service. If we had our perfect camper that we would keep for a long time, I would get it and enjoy it immediately. However the camper we have now is ok for now but not something we will keep for a long time, so couldn't justify getting it custom sized for our slightly irregular-sized camper.

Offline jeeps

  • Soft Floor Camper User
  • ****
  • Posts: 447
  • Thanked: 1 times
    • The Aussie Storm Shop
Re: Drifta package (slide out with return and full length box)
« Reply #7 on: July 30, 2015, 10:28:18 PM »
We've had ours since 2007 and it's still going strong.




Cheers
www.aussiestormshop.com.au | www.aussieberkeyshop.com.au
Offroad Camper Trailer with an Austrack top & Drifta kitchen, mostly assembled by me :)

Offline MarkVS

  • Hard Floor Camper User
  • *****
  • Posts: 1354
  • Thanked: 63 times
  • Gender: Male
Re: Drifta package (slide out with return and full length box)
« Reply #8 on: July 31, 2015, 02:37:37 AM »
Thanks for the feed back mark. One question mark does your trailer have any kind of lip on the bottom where your rear barn door closes?


Sent from my iPhone using Tapatalk

Tommo,
no it doesn't.

Mark
2020 Patrol Series 5
2015 Complete Campsite Exodus 14

2013,2015,2017 National Meet
Survivor 2013 McGirr Across the Gulf trip
2014 McGirr Cape trip
2016 Duggie Savannah trip
2018 McGirr Kimberley

For every situation you have 3 choices. Live with it, change it, or leave it. But only pick one

Offline plusnq

  • Hard Top Camper User
  • ******
  • Posts: 2204
  • Thanked: 233 times
Re: Drifta package (slide out with return and full length box)
« Reply #9 on: July 31, 2015, 04:23:46 AM »
There's a few swaggers here who have used trailer boat sliders for theirs - can get from whitfords, bcf or carac, usually blue in colour. I wasn't sure you could buy the HDPE material or similar so something to suss out - cheers to cracka for that.

I wanted a storage box and a kitchen storage area in my trailer and decided to build it myself - learn the skills (and how not to do it), plus buying more tools is always good. I didn't mind forking out for the tools, wood and supplies because the skills/supplies I've picked up along the way has allowed me to build other stuff as well so saved ourselves cash in that respect.

My trailer has also got a lip so was looking at getting a slider thick enough to sit flush or wedging it at the lip to make it run out smoothly is the idea. Haven't found anyone else on here that has had the same problem so if anyone got ideas?

Drifta is by far a brilliant company and their products are amazing - well built and brilliant customer service. If we had our perfect camper that we would keep for a long time, I would get it and enjoy it immediately. However the camper we have now is ok for now but not something we will keep for a long time, so couldn't justify getting it custom sized for our slightly irregular-sized camper.


How tall is your trailer lip? You can get skids in different thicknesses.  Here are some 10mm high.

http://www.jakaar.co.nz/Marine/Skid_Strip

More to choose from here

http://www.ebay.com.au/itm/like/121233714572?limghlpsr=true&hlpht=true&ul_noapp=true&hlpv=2&chn=ps&lpid=107&ops=true&viphx=1

Cheers

Shane

Offline tommo

  • Soft Floor Camper User
  • ****
  • Posts: 257
  • Gender: Male
  • the memorys
Re: Drifta package (slide out with return and full length box)
« Reply #10 on: August 12, 2015, 04:49:11 PM »
So I went down the diy path, got some hdpolly C section and got into it! Making a pull out kitchen and full length storage box


The remaining openings will be draws, laminate top and "wet" end and a nice varnish on the remaining surfaces


Sent from my iPhone using Tapatalk
2005 gu patrol 2009 tambo copper

Offline stiffbreeze

  • Tent User
  • ***
  • Posts: 126
  • Thanked: 5 times
  • Gender: Female
Re: Drifta package (slide out with return and full length box)
« Reply #11 on: August 12, 2015, 05:45:22 PM »
Looks great Tommo! You keeping an idea on cost or just going with it?

Sent from my D6653 using Tapatalk


Offline tommo

  • Soft Floor Camper User
  • ****
  • Posts: 257
  • Gender: Male
  • the memorys
Re: Drifta package (slide out with return and full length box)
« Reply #12 on: August 12, 2015, 06:50:02 PM »
Yep got all the cost:
High density prolly sliders- $135
Ply- 700mm bottle of wild turkey ($50)
Sure flow tap and pump - $145
That's all I've had to out lay to date, I've got 6 sets of draw runners coming -$30
And I'll have to hunt down some laminate and that's all She wrote.



Sent from my iPhone using Tapatalk
2005 gu patrol 2009 tambo copper