Author Topic: Old air tank wanted - about train size  (Read 9067 times)

0 Members and 1 Guest are viewing this topic.

Offline cheif carlos

  • Soft Floor Camper User
  • ****
  • Posts: 301
  • Thanked: 9 times
Old air tank wanted - about train size
« on: July 05, 2014, 01:33:37 PM »
Does anyone know where or how you can get an old air tank about the size of the ones you find on the side of a train.

I want to make an "Ozpig" style fire tin to have in the backyard with ability to use as BBQ or like. Main reason I want a train size is I can use it for two, has a thick wall so that when hot will radiate heat well and fire wood is no issue to me.

I did have the chance to get one but at the time did not have the interest to make one.

Cheers

Jason
Need to get the backside into gear and get out camping

scarps

  • Guest
Old air tank wanted - about train size
« Reply #1 on: July 05, 2014, 01:52:26 PM »
What about using one of the larger domestic gas bottles?
« Last Edit: July 05, 2014, 04:56:45 PM by scarps »

Offline Malcolm Tugless

  • Soft Floor Camper User
  • ****
  • Posts: 501
  • Thanked: 14 times
  • Gender: Male
  • Are we there yet ?
Re: Old air tank wanted - about train size
« Reply #2 on: July 05, 2014, 02:18:03 PM »
From off the side of a train ?

Offline Jon

  • Hard Floor Camper User
  • *****
  • Posts: 1142
  • Thanked: 7 times
  • Gender: Male
  • Bringing rain to every campsite
Re: Old air tank wanted - about train size
« Reply #3 on: July 05, 2014, 05:26:41 PM »
From off the side of a train ?

Brakes are overrated anyway.
I got a sweater for Xmas, really wanted a moaner or screamer.

Offline Bobsan

  • Tent User
  • ***
  • Posts: 123
  • Thanked: 4 times
Re: Old air tank wanted - about train size
« Reply #4 on: July 05, 2014, 05:31:53 PM »
Mains pressure water heater tank.
Mits Challenger.
Bushranger Rear fold  Camper

Offline cheif carlos

  • Soft Floor Camper User
  • ****
  • Posts: 301
  • Thanked: 9 times
Re: Old air tank wanted - about train size
« Reply #5 on: July 05, 2014, 05:42:46 PM »
Mains pressure water heater tank.
How thick are they also thinking about using as a forge so would have to withstand considerable heat

From off the side of a train ?
Yes I was working on the track a couple of weeks ago and watching the freight trains go past reminded me and yes Malcolm brakes are overrated >:D

What about using one of the larger domestic gas bottles?
If I was using one of these I would consider a "decanting?" bottle size from serves.
Need to get the backside into gear and get out camping

Offline Bobsan

  • Tent User
  • ***
  • Posts: 123
  • Thanked: 4 times
Re: Old air tank wanted - about train size
« Reply #6 on: July 05, 2014, 06:12:04 PM »
No problems with the thickness as they are a pressure vessel, they have been used as outdoor heaters, spits etc
Mits Challenger.
Bushranger Rear fold  Camper

Offline Alfa12

  • Swag User
  • **
  • Posts: 57
  • Thanked: 2 times
  • Gender: Male
Re: Old air tank wanted - about train size
« Reply #7 on: July 05, 2014, 06:23:37 PM »
I know the older Solarhart and some of the Rheem water tanks used to be 2.8mm steel.


Sent from my iPad using Tapatalk

Offline lino6

  • Hard Top Camper User
  • ******
  • Posts: 2053
  • Thanked: 65 times
  • Gender: Male
  • How repugnant
Re: Old air tank wanted - about train size
« Reply #8 on: July 05, 2014, 06:27:44 PM »
What about a forklift gas bottle?
SWMBO reminds me of a Prodigy song....
Driving - Mighty 89 2.8td Rodeo
Towing - Aussie Jays Big Red (with her DMax http://www.myswag.org/index.php?topic=33442.0)

Offline Cruiser 105Tvan

  • Hard Top Camper User
  • ******
  • Posts: 2239
  • Thanked: 145 times
  • Gender: Male
  • Another Tvan owner.
Re: Old air tank wanted - about train size
« Reply #9 on: July 05, 2014, 06:38:12 PM »
Or an out of  date Gas bottle from a vehicle?

Your local Vehicle Gas, fitter, should know where to find them.
Robert. 
VK3PPC, VZU641.
2000 FZJ105r bars,
HDJ105r Bars F&R, VRS Winch, ATZ. P3's, a cupla 2 ways as well.
and 2009 Canning Tvan pushing.

Offline Mrs smith

  • Soft Floor Camper User
  • ****
  • Posts: 331
  • Thanked: 2 times
Re: Old air tank wanted - about train size
« Reply #10 on: July 05, 2014, 06:41:05 PM »
Visit your local tip shop, you might have to go more than once but you'll probably take something home with you each visit.   :D

Offline cheif carlos

  • Soft Floor Camper User
  • ****
  • Posts: 301
  • Thanked: 9 times
Re: Old air tank wanted - about train size
« Reply #11 on: July 05, 2014, 06:55:10 PM »
Local scrap yard might be a good idea

I want to rule out gas bottles not big enough in diameter
Need to get the backside into gear and get out camping

Offline loanrangie

  • Hard Floor Camper User
  • *****
  • Posts: 1279
  • Thanked: 113 times
  • Gender: Male
Re: Old air tank wanted - about train size
« Reply #12 on: July 05, 2014, 07:30:16 PM »
What about a forklift gas bottle?

 Most fork bottles are aluminium.
MY08 TDV6 SE D3,
2003 Dingo Offroad Camper Trailer.
1974 Kombi microbus
1958 FC special sedan
1998 Triumph Daytona T595

Offline lino6

  • Hard Top Camper User
  • ******
  • Posts: 2053
  • Thanked: 65 times
  • Gender: Male
  • How repugnant
Re: Old air tank wanted - about train size
« Reply #13 on: July 05, 2014, 07:49:16 PM »
Most fork bottles are aluminium.
The 1 I have is definitely steel

Think most of the metro suppliers use aluminium but us country folk still use mostly steel.
« Last Edit: July 05, 2014, 08:16:42 PM by lino6 »
SWMBO reminds me of a Prodigy song....
Driving - Mighty 89 2.8td Rodeo
Towing - Aussie Jays Big Red (with her DMax http://www.myswag.org/index.php?topic=33442.0)

Offline D4D

  • Hard Top Camper User
  • ******
  • Posts: 16023
  • Thanked: 392 times
  • Are we there yet?
Re: Old air tank wanted - about train size
« Reply #14 on: July 05, 2014, 07:51:20 PM »
I know the older Solarhart and some of the Rheem water tanks used to be 2.8mm steel.

I have one of those sitting on the roof, free to good home.
I owe, I owe, it’s off to work I go…

Work - Outback  SOLD
Play - Prado

Offline speewa158

  • Hard Top Camper User
  • ******
  • Posts: 12092
  • Thanked: 558 times
  • Gender: Male
Re: Old air tank wanted - about train size
« Reply #15 on: July 05, 2014, 08:40:47 PM »
Ceeezzzzz it D4D in Vic & BHG in NSW for unused project material . lt amazes me the crap stored in there sheds
 l have used an old LPG gas can from a car that cost me Sweet FA . Cut a lid in after the gas was washed out & it sat full of water for 2 weeks . Out with the angle grinder , not loud bang , & away we go . Now l can cook with 2 X 14 inch Camp ovens if required . Works as a heater after that  :cheers:
You can go your own way . Treg Up & Make Dust

Offline lino6

  • Hard Top Camper User
  • ******
  • Posts: 2053
  • Thanked: 65 times
  • Gender: Male
  • How repugnant
Re: Old air tank wanted - about train size
« Reply #16 on: July 05, 2014, 08:49:42 PM »
Ceeezzzzz it D4D in Vic & BHG in NSW for unused project material . lt amazes me the crap stored in there sheds
 l have used an old LPG gas can from a car that cost me Sweet FA . Cut a lid in after the gas was washed out & it sat full of water for 2 weeks . Out with the angle grinder , not loud bang , & away we go . Now l can cook with 2 X 14 inch Camp ovens if required . Works as a heater after that  :cheers:

 :worthles:
SWMBO reminds me of a Prodigy song....
Driving - Mighty 89 2.8td Rodeo
Towing - Aussie Jays Big Red (with her DMax http://www.myswag.org/index.php?topic=33442.0)

scarps

  • Guest
Re: Old air tank wanted - about train size
« Reply #17 on: July 05, 2014, 08:58:35 PM »

:worthles:
speewa doesn't have a camera......

Offline lino6

  • Hard Top Camper User
  • ******
  • Posts: 2053
  • Thanked: 65 times
  • Gender: Male
  • How repugnant
Re: Old air tank wanted - about train size
« Reply #18 on: July 05, 2014, 09:00:19 PM »
speewa doesn't have a camera......

That could be a problem then! Strikes me as the sorta bloke that doesn't mind a "flash" though....
SWMBO reminds me of a Prodigy song....
Driving - Mighty 89 2.8td Rodeo
Towing - Aussie Jays Big Red (with her DMax http://www.myswag.org/index.php?topic=33442.0)

Offline MarkGU

  • Proud Variety Basher
  • Hard Top Camper User
  • ******
  • Posts: 2912
  • Thanked: 146 times
  • Gender: Male
  • Sorry, did i offend you with my Common Sense?
    • Everyday Hero
Re: Old air tank wanted - about train size
« Reply #19 on: July 05, 2014, 09:02:52 PM »
That could be a problem then! Strikes me as the sorta bloke that doesn't mind a "flash" though....
not sure about  a FLASH but ive seen him CRASH...er nose dive into the dirt   >:D
99'Gu 4.2 Patrol.
2004 Jayco Outback Swan


https://www.fuelly.com/driver/markgu/patrol?fu=5470975

Offline Mace

  • Hard Top Camper User
  • ******
  • Posts: 3693
  • Thanked: 148 times
  • Gender: Male
  • Life's to short to drive a boring vehicle.
Re: Old air tank wanted - about train size
« Reply #20 on: July 05, 2014, 10:20:28 PM »
Like this?

They are big!
2009 Jeep Grand Cherokee Diesel
2009 Coromal 452
2002 Commodore SS (The Toy)

Offline Mace

  • Hard Top Camper User
  • ******
  • Posts: 3693
  • Thanked: 148 times
  • Gender: Male
  • Life's to short to drive a boring vehicle.
Re: Old air tank wanted - about train size
« Reply #21 on: July 05, 2014, 10:22:30 PM »
Or even bigger!

2009 Jeep Grand Cherokee Diesel
2009 Coromal 452
2002 Commodore SS (The Toy)

Offline Mace

  • Hard Top Camper User
  • ******
  • Posts: 3693
  • Thanked: 148 times
  • Gender: Male
  • Life's to short to drive a boring vehicle.
Re: Old air tank wanted - about train size
« Reply #22 on: July 05, 2014, 10:24:04 PM »
Or freakin humongous !

2009 Jeep Grand Cherokee Diesel
2009 Coromal 452
2002 Commodore SS (The Toy)

Offline cheif carlos

  • Soft Floor Camper User
  • ****
  • Posts: 301
  • Thanked: 9 times
Re: Old air tank wanted - about train size
« Reply #23 on: July 06, 2014, 08:10:21 AM »
Like this?

They are big!
No the one I was able to get was off an electric locomotive it was about 1.8m long 800mm in diameter
Or even bigger!


Yes about this size but not with hot rivets as this would be about 12mm thick - welded one would come in around 6-8mm thick wouldn't 't take as long to heat up
Need to get the backside into gear and get out camping

Offline speewa158

  • Hard Top Camper User
  • ******
  • Posts: 12092
  • Thanked: 558 times
  • Gender: Male
Re: Old air tank wanted - about train size
« Reply #24 on: July 06, 2014, 08:34:08 AM »
Like this?

They are big!

 Well Done Mace  That tank is the ideal thing & it already has the lid set out to follow the weld line . At the top drill 8 holes to mount the hinges . Then finish the cut  remove the panel to fit the hinges . Weld on 2 horse shoes 1 either side so the lid wont fall in to far  & grind back the sharp edges you have created cutting the hole in the 1st place  . Cut some draft holes in the bottom sides so it can breath , chuck in wood , grab  :cheers:  Enjoy  :cheers:
You can go your own way . Treg Up & Make Dust