Author Topic: LED camping light strips - velcro with clear cover (Read 8707 times)

Goose · « **on:** January 20, 2014, 12:27:33 PM »

I am after a velcro strip with a clear cover for my LED camping light strips. This is to secure my LED light strip to the roof of my camper where velcro is already installed

Can't seem to find anyone that sells just the velco with clear cover. Any thoughts? The eBay selllers all seem to sell it with a light included. As i already have a KORR kit i don't need the extra light.

ATC · « **Reply #1 on:** January 20, 2014, 01:27:47 PM »

Quote from: Goose on January 20, 2014, 12:27:33 PM

I am after a velcro strip with a clear cover for my LED camping light strips. This is to secure my LED light strip to the roof of my camper where velcro is already installed

Can't seem to find anyone that sells just the velco with clear cover. Any thoughts? The eBay selllers all seem to sell it with a light included. As i already have a KORR kit i don't need the extra light.

If you find a link / supplier who who does this, can you post up a link.
I'm interested in this also.

ATC

Topender · « **Reply #2 on:** January 20, 2014, 03:26:46 PM »

What is with the clear cover? Can't you just stick some Velcro to the back of the light bars? I have a Korr led set and can't see the issue.

Dave

Goose · « **Reply #3 on:** January 20, 2014, 03:31:31 PM »

You might be onto something... just glue a nice long strip of velcro to the light itself. Would sikaflex be right for aluminum onto the material back of the velcro?

alnjan · « **Reply #4 on:** January 20, 2014, 03:44:09 PM »

Do you mean anything like this

http://www.msa4x4.com.au/ProductView.asp?ProductID=27

Topender · « **Reply #5 on:** January 20, 2014, 03:45:39 PM »

You can buy sticky backed Velcro. I think Sika would work as would super glue.

Dave

edz · « **Reply #6 on:** January 20, 2014, 03:49:36 PM »

Big green shed, go to the hose section and get some clear water hose, glue a band of velcro on each end and slide your light bar inside it ..

fishfinder · « **Reply #7 on:** January 20, 2014, 03:53:47 PM »

clear fluro tube covers - most electrical suppliers sell them

tonywatto · « **Reply #8 on:** January 20, 2014, 05:44:12 PM »

Jaycar sell different size clear Heat shrink. I have used it on my Korr lights.
I bought rare earth magnets(also Jaycar) and slid under the heat shrink. the lights will hold on any metal poles on the camper.

Regards
Tony

Azz · « **Reply #9 on:** January 20, 2014, 07:44:03 PM »

Quote from: tonywatto on January 20, 2014, 05:44:12 PM

Jaycar sell different size clear Heat shrink. I have used it on my Korr lights.
I bought rare earth magnets(also Jaycar) and slid under the heat shrink. the lights will hold on any metal poles on the camper.

Regards
Tony

You are a bloody genius

weeds · « **Reply #10 on:** January 20, 2014, 07:53:50 PM »

I have two LED strip lights in a clear pocket with Velcro in my camper........I brought them complete from Springers low voltage

Sent from my iPad using Tapatalk

bobnrob · « **Reply #11 on:** January 20, 2014, 08:05:03 PM »

Happy to leave the LED strips permantly on your bow(s)?
I got some 30mm clear heat shrink off ebay, fed the heat shrink with LED strip over the bows

Goose · « **Reply #12 on:** January 21, 2014, 10:15:20 AM »

What i am after is the "pocket". One side is velcro, the other is clear vinyl/plastic. The LED bar slips in and then i can stick it anywhere in my tent that there is velcro. My tent has heaps of pre-sewn velcro strips for this kind of stuff.

So what im after should only cost about $2.

Plenty of kits on ebay have the pocket and the light and cables and its about $80... im just after the pocket as i already have spent big on the lights and don't need another light.

As nobody seems to sell the pocket on its own there is probably a micro-business idea here for anyone interested.

ATC · « **Reply #13 on:** January 21, 2014, 12:01:48 PM »

Quote from: Goose on January 21, 2014, 10:15:20 AM

What i am after is the "pocket". One side is velcro, the other is clear vinyl/plastic. The LED bar slips in and then i can stick it anywhere in my tent that there is velcro. My tent has heaps of pre-sewn velcro strips for this kind of stuff.

So what im after should only cost about $2.

Plenty of kits on ebay have the pocket and the light and cables and its about $80... im just after the pocket as i already have spent big on the lights and don't need another light.

As nobody seems to sell the pocket on its own there is probably a micro-business idea here for anyone interested.

I'd pay more than $2 for them, but that's also what I'm after.

Been looking & searching for a while.
Might just have to buy some of the light strips from McGirr and mount them.

Tim - Stratford · « **Reply #14 on:** January 23, 2014, 02:35:03 PM »

Quote from: Goose on January 21, 2014, 10:15:20 AM

What i am after is the "pocket". One side is velcro, the other is clear vinyl/plastic. The LED bar slips in and then i can stick it anywhere in my tent that there is velcro. My tent has heaps of pre-sewn velcro strips for this kind of stuff.

When Sarah gets home I'll show her this - see if she can knock something up. How long are your lights?

Tim

Goose · « **Reply #15 on:** January 23, 2014, 04:12:06 PM »

50cm long lights. Light cross section is 2cmx2cm so pocket needs to be bigger than that.

My tent has the Velcro loops so the pocket side needs to be Velcro hooks.

Needs to be open both ends to allow light and c ables through (light has cable at both ends).

Goose

Tim - Stratford · « **Reply #16 on:** January 24, 2014, 02:43:55 PM »

Goose,

How wide is the Velcro on the camper?

Sarah

ATC · « **Reply #17 on:** January 24, 2014, 08:16:24 PM »

It it something like this that you are after?

Led Strip Light in flexible cover

This is the type of thing that I'm after, ideally 75-100cm long with eyelets on the ends.
Then i can string it up.
Some Velcro on the back could be nice, but should it be the hooks or the loops?

What would something like these cost to make?

ATCL

Tim - Stratford · « **Reply #18 on:** January 25, 2014, 10:30:28 AM »

PM sent ATC

Tim - Stratford · « **Reply #19 on:** January 27, 2014, 03:25:26 PM »

Tada!

http://www.myswag.org/index.php?topic=30053.0

Goose · « **Reply #20 on:** January 27, 2014, 04:12:02 PM »

Looks good is the Velcro side the 'hooks'? How do I buy?

Tim - Stratford · « **Reply #21 on:** January 27, 2014, 04:21:56 PM »

Quote from: Goose on January 27, 2014, 04:12:02 PM

Looks good is the Velcro side the 'hooks'? How do I buy?

Pm sent

News:

Author Topic: LED camping light strips - velcro with clear cover (Read 8707 times)