Ok guys at Nick's suggestion I have been looking into making a digital version as well. Therefore I can just email them out. The bit Im having trouble with is getting them to come up to the right scale so you can print them on standard a4...
The GU has three mounting points. This is where I will need some input from those who are interested.
The first mounting point is where the mirror sits and just needs a bit of steel bent into an L shape with some holes drilled into it. very easy. (not changeable)
The other two are as follows.
There is one under the main cabin light, and has a really beefy bracket under the roof liner. This is by far the easiest to locate and very strong. The down side is it makes it very long.
This one is by far the easiest to use though
The other is about 20-30cm closer to the windscreen. It is a crossrib that has two screw holes already in place. It was easy enough in mine as I already had the roof lining cut to fit a rear screen in there. This is the location that The outback consoles use.
I am happy to do either. On the last one I made, similar to dannys I had a cutout base to mount the roof screen into the console.
Hey Evo silly question
Do you have a template for 80 cruza
Brett
I don't have a template nor a console for an 80 series. I am happy to make one from scratch If I can get a hold of one though?
Cheers
Evo
