« previous next »
Pages: [1]   Go Down

Author Topic: Brake Controller  (Read 2247 times)

0 Members and 1 Guest are viewing this topic.

Offline NewMax

  • Tent User
  • ***
  • Posts: 131
Brake Controller
« on: August 13, 2011, 12:06:14 PM »
Hi,

We have a Tekonsha brake controller (model3?) on our 2007 Hilux Diesel Auto 4wd ute and are towing a JAYCO Flamingo S/T 2011 outback camper.    Brake Controller was set up for us by the dealer we bought the camper from.  He drove around the block and did a couple of stops.  Was originally set at 6 but we found that when pulling to a stop driving slowly at traffic lights etc the camper brakes would grab and we would "hop" to a stop.  We have backed off the setting until now is less than 4 but still having the same problem.  Camper brakes are also locking at times in slow speed stops.

The Flamingo is the largest of the JAYCO campers and we are on the road full time with a fair bit of gear two water tanks etc. Likely to be 1 1/2 ton.  Toyota pulls camper easily. Fuel use is around
 12.5 liters per 100 km towing at around 90 km/h.

Any suggestions re brake controller?
Logged

Offline Estelle

  • Hard Floor Camper User
  • *****
  • Posts: 1315
  • New members of the leisure club
Re: Brake Controller
« Reply #1 on: August 13, 2011, 08:55:10 PM »
Boost setting?
Drop it down?
Logged
Chris & John

05 DiD Platinum Pajero, Cub Spacevan Drover Off Road

Offline Teabag

  • The bush is my playground......
  • Global Moderator
  • Hard Top Camper User
  • *****
  • Posts: 3576
  • Thanked: 1 times
  • Gender: Male
  • "Better to be looking at it than looking for it"
Re: Brake Controller
« Reply #2 on: August 13, 2011, 09:01:29 PM »
Power down, disconnect the plug to the unit for 5 mins and re-connect.
Logged
2006 GU4 4.2TDi Patrol with many goodies. Currently no camper but have had a Customline Camper, Kimberly Kamper and Jayco Hawk....Tenting and Swagging it now..

Offline Black Diamond

  • "IF IT HAS TITS OR WHEELS IT WILL GIVE YOU TROUBLE........"
  • 2017 National Meet Volunteer
  • Hard Top Camper User
  • *****
  • Posts: 5916
  • Thanked: 88 times
  • Gender: Male
  • Cruisin through Life in the 80.......
Re: Brake Controller
« Reply #3 on: August 13, 2011, 09:09:45 PM »
I tow the Swan which is the same size and similar weight as the Flamingo with my Diesel Prado, and have found 5.4 is perfect when full laden and both water tanks filled, and 5.2 when empty.
The Prado is manuel so using the gears to slow down might make a difference though.
Also use the Tekonsha  :cheers:

« Last Edit: August 13, 2011, 09:12:17 PM by Black Diamond »
Logged
1996 80 series Cruiser
2005 Coota Camper - The legend lives on.....

Offline NewMax

  • Tent User
  • ***
  • Posts: 131
Re: Brake Controller
« Reply #4 on: August 15, 2011, 02:39:17 PM »
Our unit has four boost settings 0-3.  Was set on 1. Planning on dropping to 0.
Logged

Offline Jason B

  • "Mark Goldie recovery team coordinator"
  • Hard Top Camper User
  • ******
  • Posts: 2880
  • Thanked: 45 times
  • Gender: Male
  • 80 Series Turbo DX Cruiser, Kimberley Kamper 2013 SE
Re: Brake Controller
« Reply #5 on: August 15, 2011, 02:47:02 PM »
Also look at the way you brakes are adjusted on the trailer. Ensure these are adjusted correctly.


Regards


Jas
Logged
Pages: [1]   Go Up
« previous next »