MySwag.org The Off-road Camper Trailer Forum

General => General Discussion => Topic started by: r0ssrg on February 09, 2013, 09:04:47 AM

Title: Flat pack steel fire place forum post
Post by: r0ssrg on February 09, 2013, 09:04:47 AM
Hi guys

Not that long ago there was a thread about home made flat pack fire places made out of steel.

I've been searching for the last 20 minutes and can't find it.

can anyone post the link to this thread?

Thanks so much.

Rossco
Title: Re: Flat pack steel fire place forum post
Post by: Turbojohn on February 09, 2013, 09:11:06 AM
My portable fireplace by xcavator in the camp oven section
It's about the fifth one down the list. Sorry don't know how to put up a link :cheers:
Title: Re: Flat pack steel fire place forum post
Post by: Kit_e_kat9 on February 09, 2013, 01:16:36 PM
.
Title: Re: Flat pack steel fire place forum post
Post by: Renno on February 09, 2013, 01:31:43 PM
Roscco.
This is one I started a while ago Fire Above the Ground  (http://www.myswag.org/index.php?topic=25624.msg394869#msg394869) and there is the  Easy Burn (http://easysteelsolutions.com.au/products/fire/easy-burn-beach) pedeosar found. Still haven't made my mind up. I spoke to easy steel solutions and they were pretty accommodating to change size or make one similar to the ebay idea.   

Renno :cheers:
Title: Re: Flat pack steel fire place forum post
Post by: r0ssrg on February 09, 2013, 10:14:33 PM
Thanks guys.   Kit_e how on earth do you find things so easily?

Rossco
Title: Re: Flat pack steel fire place forum post
Post by: fuji on February 10, 2013, 02:24:32 PM
There's always the one on the Drifta website.
http://www.drifta.com.au/SnowPeak.php?PHPSESSID=5128414a7dbe72523677804c27f7c1c9 (http://www.drifta.com.au/SnowPeak.php?PHPSESSID=5128414a7dbe72523677804c27f7c1c9) :cup:
Title: Re: Flat pack steel fire place forum post
Post by: Withy on February 10, 2013, 03:33:00 PM
There's always the one on the Drifta website.
http://www.drifta.com.au/SnowPeak.php?PHPSESSID=5128414a7dbe72523677804c27f7c1c9 (http://www.drifta.com.au/SnowPeak.php?PHPSESSID=5128414a7dbe72523677804c27f7c1c9) :cup:


Like this one?

We use it everywhere and it leaves no footprint.

Not cheap though.

Withy
Title: Re: Flat pack steel fire place forum post
Post by: ian_baker58 on February 10, 2013, 03:37:05 PM
There's always the one on the Drifta website.
http://www.drifta.com.au/SnowPeak.php?PHPSESSID=5128414a7dbe72523677804c27f7c1c9 (http://www.drifta.com.au/SnowPeak.php?PHPSESSID=5128414a7dbe72523677804c27f7c1c9) :cup:


Brilliant product!  I have one of these, and the HillBilly Cookstand setup.  The SnowPeak is made from stainless and folds flat!  Recommend you order the additional/optional canvas bag for it - holds the fire/pit folded and accessories!.. ;D
Title: Flat pack steel fire place forum post
Post by: BrindiCruiser on February 10, 2013, 04:39:43 PM
I would love the snow peak firepit. But I think my pocket is more like the eBay job.
Title: Re: Flat pack steel fire place forum post
Post by: fuji on February 10, 2013, 05:32:47 PM
I would live the snow peak firepit. But I think my pocket is more like the eBay job.


Too true!
Title: Re: Flat pack steel fire place forum post
Post by: Wazza2 on February 10, 2013, 08:09:46 PM
Another vote for Snow Peak and the canvas bag! The fire breathes well without burning the timber too fast. Puts out heaps of heat through being up off the ground. Easy to cook on and fantastic flat packing for easy transportation. Well worth the cost
Title: Re: Flat pack steel fire place forum post
Post by: speewa158 on February 11, 2013, 09:14:17 AM
lf you dont want the heavy steel l can sell you a PDFP , Pre Dug Fire Pit . This is a multie use devise a real time & space saver . With the PDFP you can store stuff in it in transit then put it in the groung when you need the fire pit . Send the dimentions of what you need & a HUGE amount of $$ plus postage , handling & insurence  Then l can get started on it for you . The only downside to the PDFP is if it falls off the CT in transit its really hard to find again as it looks almost the same as a Pothole . Potholes are not the same quality as PDFPs
Dont be fooled by be some Scammer that will try to sell you nothiung The PDFP is Crafted Quality . Unseen be the nonbeliver  :cheers:
Title: Re: Flat pack steel fire place forum post
Post by: r0ssrg on February 11, 2013, 01:54:44 PM
lf you dont want the heavy steel l can sell you a PDFP , Pre Dug Fire Pit . This is a multie use devise a real time & space saver . With the PDFP you can store stuff in it in transit then put it in the groung when you need the fire pit . Send the dimentions of what you need & a HUGE amount of $$ plus postage , handling & insurence  Then l can get started on it for you . The only downside to the PDFP is if it falls off the CT in transit its really hard to find again as it looks almost the same as a Pothole . Potholes are not the same quality as PDFPs
Dont be fooled by be some Scammer that will try to sell you nothiung The PDFP is Crafted Quality . Unseen be the nonbeliver  :cheers:

 :worthles:

Look forward to the pics.    :police:

Rossco
Title: Re: Flat pack steel fire place forum post
Post by: BrindiCruiser on February 11, 2013, 02:16:05 PM
lf you dont want the heavy steel l can sell you a PDFP , Pre Dug Fire Pit . ...

Amazingly, some nasty, and ill-informed managers of campgrounds have banned your new product. They fear that Pre Dug Fire Pit will scare people who bring dogs and children away from their campground. Or something like that.

Seriously, a few more permanent firepits at campground would be great.
Title: Re: Flat pack steel fire place forum post
Post by: noel_w on February 11, 2013, 02:55:48 PM
I have heard on the grapevine that those PDFP's will magically consume all your beer in one foul swoop. Just watch them. Lucky for us we are immune from this strange happening in Qld.  :cheers:
Title: Re: Flat pack steel fire place forum post
Post by: speewa158 on February 11, 2013, 05:04:24 PM
noel,,,w immume from this strange happening in QLD  :cheers:      Dont You Worry About That  :cup: :cheers:
The PDFP is & has been proved in all states to be a stable product devoid of strange happenings  . :cheers:
Get 1 now before they disappear forever  :cheers:
Title: Re: Flat pack steel fire place forum post
Post by: Matto on February 12, 2013, 02:02:30 PM
Are the PDFP's stackable? Say I have two of them, can I store one inside the other, or will this cause the universe to explode?

Also, are they rated? I don't want to get caught out using a dodgy unrated PDFP.

Cheers,
Matto :)
Title: Re: Flat pack steel fire place forum post
Post by: crackacoldie on February 12, 2013, 02:08:25 PM
Are PDFP's Australian made and do they carry the logo.  Are they made of Australian products or assembled in Australia?  don't want to get short with an imitation imported, full australian built copy. >:D
Title: Re: Flat pack steel fire place forum post
Post by: Alan Loy on February 12, 2013, 02:50:28 PM
I'm interested in the price of PDFP. 

Whilst I am sure they are good idea I was considering buying some PDPH (Pre Dug Post Holes) from a major retailer and joining them together.   ???

I realise that many of the PDPH s are imported   :-[ but we all have to fit within a budget.
Title: Re: Flat pack steel fire place forum post
Post by: speewa158 on February 12, 2013, 04:36:00 PM
Matto
Are the PDFP's stackable? Say I have two of them, can I store one inside the other, or will this cause the universe to explode?

Also, are they rated? I don't want to get caught out using a dodgy unrated PDFP.

Cheers,
Matto :)
Mate What can l tell you PDFP are stackable , as they are the original others have copied the design beyond World Wide Patent  . The PDPH is nearly an extended PDFP . Who in there right mind would order a 1.2m X450mm  round PDFP  ???  its just a waste of wood to fill the hole to get coals going  & yes they can be stacked inside themselves but only if the PDFPSC is used .  At an extra cost the PDFPSF ( Per Dug Fire Pit Storage Flask )
All Genuine PDFP's  &  PDFPSF are Rated A1  & thats the best you can get . Hurry this is a limpted offer  :cheers:
Title: Re: Flat pack steel fire place forum post
Post by: speewa158 on February 12, 2013, 04:48:49 PM
crackacoldie
Are PDFP's Australian made and do they carry the logo.  Are they made of Australian products or assembled in Australia?  don't want to get short with an imitation imported, full australian built copy. >:D
[/quote]
To alay any conserns you may have All Genuine  PDFP's  are
- Mined In Australia
-By Australian Workers
- Created for Australian conditions
- Ready to be used & abused & still be able to serve many trips
- PDFP's dont have to carry the Australian Products label as they are only avilable to Swaggers as is such a sort after kit
- Some have tried to create PDFP's but just ended up with nothing much at all really
Dont be confused send emence amounts of $$ to me urgently  & on your behalf l will get busy  :cheers:
Title: Re: Flat pack steel fire place forum post
Post by: speewa158 on February 12, 2013, 04:54:07 PM
I'm interested in the price of PDFP. 

Whilst I am sure they are good idea I was considering buying some PDPH (Pre Dug Post Holes) from a major retailer and joining them together.   ???

I realise that many of the PDPH s are imported   :-[ but we all have to fit within a budget.
Send me huge amounts of $$ to be asured of a genuine PDFP for you & your family to sit aruond enjoying your next trip . How silly would you feel with the family sitting staring at the ground after you had purchased an imported rip off  :cheers: Sign a cheque send it to me & l will fill in the messy bits to save you time & worry . & dont let it bounce will you  :cheers:
Title: Flat pack steel fire place forum post
Post by: Marcus73 on February 12, 2013, 06:23:50 PM
Well this threads gonna help get forum numbers up I'm sure. It's just a wealth of knowledge around here....... Bloody yobos..... Lol
Title: Re: Flat pack steel fire place forum post
Post by: D4D on February 12, 2013, 06:27:06 PM
Well this threads gonna help get forum numbers up I'm sure.

I was thinking the same thing
Title: Re: Flat pack steel fire place forum post
Post by: xcvator on February 12, 2013, 07:09:27 PM
Just a word of warning if you intend to get a pdfp from speewa as I think he may import them from China and just unfold them and repackage. I have been making holes in Australia for more than 30 years, if you order from me you can even come and see it being dug to whatever size and shape you require  :angel: