Author Topic: Bye bye tent pegs?  (Read 6340 times)

0 Members and 2 Guests are viewing this topic.

Offline austastar

  • Hard Top Camper User
  • ******
  • Posts: 4171
  • Thanked: 334 times
  • Gender: Male
Bye bye tent pegs?
« on: June 14, 2023, 06:10:47 PM »
Hi,
    Went to the Lakes for the LWE, bit not tropical, but only a few snow flurries and lots of wind.
The camp at Dago Point is not very tent peg friendly so we took some Bugle Head screws and a rattle gun.
Brilliant!
Some washers would be handy for the Oztent D rings, but holding down shade cloth for a mat was the best - no tripping over a counter sunk screw just below ground level.
So much easier.
Cheers

Sent from my SM-T380 using Tapatalk


Offline Hairs

  • Get outside every day, Miracles are waiting everywhere
  • Hard Top Camper User
  • ******
  • Posts: 6155
  • Thanked: 709 times
  • Gender: Male
  • A door can be a jar, but a jar can not be a door??
Re: Bye bye tent pegs?
« Reply #1 on: June 14, 2023, 06:49:32 PM »
What ever works, Cheers for sharing what worked for you, I'll try it, yeah I've seen the Screw pegs also.
Remember being camped at Leigh Crk(2011), bent a few pegs.
I then went  to Y12 Reo bar & a bigger hammer :)


You don't use magic to disappear, ya use a 4x4 & Swag.

You don't use magic to disappear, all you need is a 4wd & a Swag ;)

Offline paceman

  • Hard Top Camper User
  • ******
  • Posts: 3226
  • Thanked: 266 times
  • Gender: Male
Re: Bye bye tent pegs?
« Reply #2 on: June 14, 2023, 06:56:43 PM »
What size/gauge did you use?  Have been thinking about doing this for a while…


Sent from my iPhone using Tapatalk

Offline austastar

  • Hard Top Camper User
  • ******
  • Posts: 4171
  • Thanked: 334 times
  • Gender: Male
Re: Bye bye tent pegs?
« Reply #3 on: June 14, 2023, 08:46:06 PM »
Hi,
   I took a box of 5mm hex about 120mm, and my son took a bag of landscape screws with a 6mm hex drive about 200mm.
We both thought of it independently. I may have been influenced from advertising  for Peggy Pegs, but had bugleheads on hand from a recent decking job.
Cheers

Sent from my SM-T380 using Tapatalk


Offline xcvator

  • 2017 National Meet Volunteer
  • Hard Top Camper User
  • *****
  • Posts: 4328
  • Thanked: 322 times
  • Gender: Male
Re: Bye bye tent pegs?
« Reply #4 on: June 14, 2023, 08:49:40 PM »
Geez, where have you blokes been for the last 10 years ?
Aldi and Bunnings have been selling kits for years and I made my own 10 or 11 years ago, sheesh.
spending the kids inheritance as fast as I can

tug 2018 Isuzu Mux LSU
1999 se diesel Jackaroo
July 10/2012  outback campers "Tanami"
New Age "Little Joey"

Offline Pottsy

  • Hard Top Camper User
  • ******
  • Posts: 1832
  • Thanked: 404 times
Re: Bye bye tent pegs?
« Reply #5 on: June 14, 2023, 08:53:35 PM »
Been using 225mm landscaping screws with a 6mm hex driver and a mud flap washer for years, for hard ground I also carry a 6mm x 300mm masonry drill to pre drill a hole if need be, never used it yet.
if God had meant me to walk he wouldn't have invented 4wds! Mitsubishi Challenger Pc 2014 (Blondie)
Challange Meredien Offroad Walk Thru

Offline Fizzie

  • Hard Top Camper User
  • ******
  • Posts: 5067
  • Thanked: 753 times
  • Gender: Male
Re: Bye bye tent pegs?
« Reply #6 on: June 15, 2023, 06:40:58 AM »
This trip I only used the Aldi screw in pegs that I picked up a while back, rather than bashing in normal pegs.

Worked great for both the awning hold-down ropes, & also the groundsheet :cup: (although we did trip on them a couple of times :-[)

Then started thinking about the 10+kg weight of the peg bag, with assorted pegs & a couple of hammers, vs a box of screw pegs at <1kg, plus a battery drill that gets used for other things as well ... ::)

I know my BiL uses 200mm hex heads + washers for his floor, so 6-8 of them, plus 4 "normal" screw pegs, would be even lighter again!
Winner PotM comp Jan 2021!

Isuzu: 2017 MU-X LST
Coromal: 2023 Soul Seeker 18'
Sunnie:  2010 Sunliner Holiday

Offline HEM19X

  • Hard Top Camper User
  • ******
  • Posts: 3010
  • Thanked: 51 times
  • Gender: Male
  • If I agree with you, then we would both be wrong!
Re: Bye bye tent pegs?
« Reply #7 on: June 15, 2023, 09:29:31 AM »
Hi,
    Went to the Lakes for the LWE, bit not tropical, but only a few snow flurries and lots of wind.
The camp at Dago Point is not very tent peg friendly so we took some Bugle Head screws and a rattle gun.
Brilliant!
Some washers would be handy for the Oztent D rings, but holding down shade cloth for a mat was the best - no tripping over a counter sunk screw just below ground level.
So much easier.
Cheers

Sent from my SM-T380 using Tapatalk

Bugle head screws can fill with crap, sand etc, makes them more difficult to get out especially in really hard ground. Thats why I use coach bolts...

Hem
2019 BT50 with custom canopy and lots of fruit. Towing a 2014 Lotus Freelander [welcome to the dark side]
The following users thanked this post: slave

Offline jclures

  • Hard Top Camper User
  • ******
  • Posts: 3621
  • Thanked: 211 times
  • Gender: Male
Re: Bye bye tent pegs?
« Reply #8 on: June 15, 2023, 09:32:27 AM »
I welded nuts to the landscaping screws.

Offline Bird

  • Once Was Lost, now am found
  • Hard Top Camper User
  • ******
  • Posts: I am a geek!!
  • Thanked: 1874 times
  • Gender: Male
  • Life is far too long....
    • My Place.
Re: Bye bye tent pegs?
« Reply #9 on: June 15, 2023, 09:42:47 AM »
Quote from: HEM19X
Thats why I use coach bolts...
yea remember a thread long ago showing the advantage of coach bolts and cordless...

Would have saved me a dozen pegs in Flinders few years ago in their concrete "dirt"
-
Click to enlarge

Gone to a new home

Offline NZMarkb

  • Hard Floor Camper User
  • *****
  • Posts: 1202
  • Thanked: 163 times
  • Gender: Male
Re: Bye bye tent pegs?
« Reply #10 on: June 15, 2023, 09:52:43 AM »
yea remember a thread long ago showing the advantage of coach bolts and cordless...

Would have saved me a dozen pegs in Flinders few years ago in their concrete "dirt"

Not to mention the ease retrieving at the end of your stay :)
If your not prepaired to stand behind our troops
Then feel free to stand in front of them

Offline jclures

  • Hard Top Camper User
  • ******
  • Posts: 3621
  • Thanked: 211 times
  • Gender: Male
Re: Bye bye tent pegs?
« Reply #11 on: June 15, 2023, 11:03:02 AM »
I have used coach bolts but I have found the screws with welded nuts work better for me.

Offline nab

  • Hard Top Camper User
  • ******
  • Posts: 1940
  • Thanked: 377 times
Re: Bye bye tent pegs?
« Reply #12 on: June 16, 2023, 01:13:06 AM »
On a slight tangent -
Nothing beats the sound of an impact driver going flat tack from the people that rocked up to the peaceful camp at 8pm haha!!
Better than the ones who are packing up at 5am for an early start and they use the impact driver to wind up the van stabilisers... surely you can use the hand winder at that time of the morning?
I think I'm officially getting old.
2005 Jayco Dove - sold
2003 Coromal Pioneer XC

Offline Fizzie

  • Hard Top Camper User
  • ******
  • Posts: 5067
  • Thanked: 753 times
  • Gender: Male
Re: Bye bye tent pegs?
« Reply #13 on: June 16, 2023, 07:14:54 AM »
Better than the ones who are packing up at 5am for an early start

But who, after clanging & clattering at 5-6am, don't actually pull out until 9-10, then you pass them an hour down the road, where they've stopped for morning tea!
 ::) >:(

I think I'm officially getting old.

Possibly, but whinging about some things is justified! ;D
Winner PotM comp Jan 2021!

Isuzu: 2017 MU-X LST
Coromal: 2023 Soul Seeker 18'
Sunnie:  2010 Sunliner Holiday

Offline silverfox1111

  • Tent User
  • ***
  • Posts: 210
  • Thanked: 35 times
  • Gender: Male
Re: Bye bye tent pegs?
« Reply #14 on: June 17, 2023, 08:21:19 AM »
I feel your pain, nab! Once had a bloke parked near us do 3 laps of he's van adjusting the 4 van legs with an impact driver. 3 bloody loud laps!! It's one of my biggest hates now.
Silverfox
Toyota hilux
Modcon ff1(no more)
Jayco swan outback

Offline GeoffA

  • 2017 National Meet Volunteer
  • Hard Top Camper User
  • *****
  • Posts: 8493
  • Thanked: 607 times
  • Gender: Male
  • "If 1 axle is good, 2 must be better........."
Re: Bye bye tent pegs?
« Reply #15 on: June 17, 2023, 09:42:36 AM »
I tried the screws, but not for me.

Have gone to Snow Peak pegs. Real quality....

 :cheers: :cheers:
Geoff and Kay

1999 GU TD42T wagon
2005 Coota Camper - gone, but never forgotten
2020 North Coast 15' Titanium - tandem, of course

Land Cruiser.....the Patrol that Toyota try to build.....

Offline GGV8Cruza

  • The Cable Guy
  • Global Moderator
  • Hard Top Camper User
  • *****
  • Posts: 11626
  • Thanked: 620 times
  • Gender: Male
  • If 1 turbo is good, 2 must be better. VK3GJG
Re: Bye bye tent pegs?
« Reply #16 on: June 17, 2023, 10:03:19 AM »
I tried the screws, but not for me.

Have gone to Snow Peak pegs. Real quality....

 :cheers: :cheers:

They are great, survived the Flinders and there is nothing better than banging in a peg to announce to the world that you have arrived. I purchased a long handle puller which makes it easier to get out as well

GG
The following users thanked this post: GeoffA

Offline HEM19X

  • Hard Top Camper User
  • ******
  • Posts: 3010
  • Thanked: 51 times
  • Gender: Male
  • If I agree with you, then we would both be wrong!
Re: Bye bye tent pegs?
« Reply #17 on: June 18, 2023, 11:32:54 AM »
I tried the screws, but not for me.

Have gone to Snow Peak pegs. Real quality....

 :cheers: :cheers:

Streaky Bay SA & Denham WA will test the best of pegs!! ;D ;D ;D
2019 BT50 with custom canopy and lots of fruit. Towing a 2014 Lotus Freelander [welcome to the dark side]

Online wakychapmans

  • Hard Floor Camper User
  • *****
  • Posts: 1077
  • Thanked: 144 times
Re: Bye bye tent pegs?
« Reply #18 on: July 03, 2023, 02:56:36 PM »
Aldi had the screw in ones about 2 months or so back.

$9.95 for a box of 12 I think. I picked up a set and will give them a go.

Not expecting huge quality. Just want to test the idea out before i spend up on the expensive brand(s)...

Wayne & Kyria Chapman
(+ Tucker & Monty the Samoyeds)
www.youtube.com/@morepawstravels/about
2018 GXL 78 Troopy with Alu-Cab conversion
105 series Landcruiser 1HZ (soooooo much power)
1994, Supreme Getaway 14' (a "renovators dream")
http://www.myswag.org/index.php?topic=56

Offline xcvator

  • 2017 National Meet Volunteer
  • Hard Top Camper User
  • *****
  • Posts: 4328
  • Thanked: 322 times
  • Gender: Male
Re: Bye bye tent pegs?
« Reply #19 on: July 03, 2023, 04:34:15 PM »
Aldi had the screw in ones about 2 months or so back.

$9.95 for a box of 12 I think. I picked up a set and will give them a go.

Not expecting huge quality. Just want to test the idea out before i spend up on the expensive brand(s)...




I've them for years, just don't forget to drill out the plastic part a bit before you use them
spending the kids inheritance as fast as I can

tug 2018 Isuzu Mux LSU
1999 se diesel Jackaroo
July 10/2012  outback campers "Tanami"
New Age "Little Joey"

Offline Fizzie

  • Hard Top Camper User
  • ******
  • Posts: 5067
  • Thanked: 753 times
  • Gender: Male
Re: Bye bye tent pegs?
« Reply #20 on: July 04, 2023, 07:27:31 AM »
don't forget to drill out the plastic part a bit before you use them

Ah, so the plastic double hook is supposed to be able to spin is it ???

My Aldi ones has it fixed in place, so I just put the screw shaft through the loop on the tent rope spring, & fasten them down that way! :-\
Winner PotM comp Jan 2021!

Isuzu: 2017 MU-X LST
Coromal: 2023 Soul Seeker 18'
Sunnie:  2010 Sunliner Holiday

Offline xcvator

  • 2017 National Meet Volunteer
  • Hard Top Camper User
  • *****
  • Posts: 4328
  • Thanked: 322 times
  • Gender: Male
Re: Bye bye tent pegs?
« Reply #21 on: July 04, 2023, 08:02:19 AM »
Ah, so the plastic double hook is supposed to be able to spin is it ???
No, but I knocked the screw out and drilled the hole out about 1mm and ground off the little lugs on the screw.
Now they are easy to use, you can hold the hook in position while running in the screw.
Another tip , if you hit a small rock give the screw a bash with a mash hammer.
spending the kids inheritance as fast as I can

tug 2018 Isuzu Mux LSU
1999 se diesel Jackaroo
July 10/2012  outback campers "Tanami"
New Age "Little Joey"
The following users thanked this post: Fizzie

Online wakychapmans

  • Hard Floor Camper User
  • *****
  • Posts: 1077
  • Thanked: 144 times
Re: Bye bye tent pegs?
« Reply #22 on: July 04, 2023, 09:52:03 AM »


I've them for years, just don't forget to drill out the plastic part a bit before you use them

good to know.

thanks
Wayne & Kyria Chapman
(+ Tucker & Monty the Samoyeds)
www.youtube.com/@morepawstravels/about
2018 GXL 78 Troopy with Alu-Cab conversion
105 series Landcruiser 1HZ (soooooo much power)
1994, Supreme Getaway 14' (a "renovators dream")
http://www.myswag.org/index.php?topic=56

Offline lloydus67

  • Hard Floor Camper User
  • *****
  • Posts: 922
  • Thanked: 156 times
Re: Bye bye tent pegs?
« Reply #23 on: July 13, 2023, 09:19:46 PM »
I think they are great, i have 4 boxes, so 48 screws, I have about 20 flat, square washers that I use. To secure camping mats, gazebo legs etc, just remove the plastic hook bit. (No trip hazard on mats) I still carry sand pegs for fine loose sand, but everything else is definitely screwed.


Sent from my iPhone using Tapatalk