Let's Talk About Tyres!

[JCOJ]

As mentioned, it is strongly recommended (would like to say mandatory) that you have good All Terrain Tyres in a Light Truck construction for this trip. 

There are some sections that are the nice smooth bitumen, however other places are very corrugated, and a bit of sand and everything else chucked in as well.

When moving from bitumen to the dirt / corrugations it is recommended that tyre pressures be reduced, then of course pumped back up when back on the bitumen.  This not only gives you a comfier ride, but also protects your tyres from staking (puncturing).  It also looks after your vehicle as it won't be bouncing all over the place due to high tyre pressures.

There is a good guide as to what pressures are suitable for which terrain that would be a good idea to download and take with you here: http://cooper.etd.07.com.au/media/1400/cooper-drivers-guide-tyre-pressures.pdf

Also to be able to pump your tyres up again it is recommended that you have an air compressor of some sort (and two hoses so you can pump up your camper tyres too as these should be let down at the same time as your 4wd tyres).  So you know how far to pump them up to - you'll need a reliable tyre gauge.

So in short:  LT Tyres, Compressor, and Tyre Gauge. 

[brickiematt]

Thanks for the info John
I may have asked this before, but just want to be sure: the tyres on my CT are a light truck construction,  but the tread pattern is more HT than AT. My thinking is that as the trailer tyres dont provide any drive as such, then it isn't as important to have AT's on the trailer. Any thoughts on this?
Bridgestone 697's on the Paj, so all good there!
Cheers
Matt

[JCOJ]

If your camper tyres are LT construction then all is good - I wouldn't worry so much about the tread pattern.

[brickiematt]

If your camper tyres are LT construction then all is good - I wouldn't worry so much about the tread pattern.

Thanks mate. I was just envisioning Di's response if I told her we need new tyres for the trailer before we go......
They have plenty of tread on them,  so all good.
 

[Bird]

Good to see the professionalism here, leaving nothing to the last minute 

You people will be in good hands here...

[lindamc]

we are all good with these things and tyres are mickey thompson LT ATs

Sent from my GT-I9100T using Tapatalk 2

[StevenB]

got new BFG MTs a couple of weeks ago

[Black Diamond]

And dont forgt about the poor old spare and a good tyre repair kit too 

[lindamc]

And dont forgt about the poor old spare and a good tyre repair kit too 

i have a tyre repair kit, but what makes a good one?

Sent from my GT-I9100T using Tapatalk 2

[GGV8Cruza]

i have a tyre repair kit, but what makes a good one?

Sent from my GT-I9100T using Tapatalk 2

never having to use it

I carry a few different types of valves as well just in case of a problem especially when using the deflator

GG

[lindamc]

never having to use it

I carry a few different types of valves as well just in case of a problem especially when using the deflator

GG

ok, thanks GG

[Black Diamond]

i have a tyre repair kit, but what makes a good one?

Sent from my GT-I9100T using Tapatalk 2

The most important thing is to have a kit which has everything you need in it with a couple of extras. Something like the ARB kit http://www.arb.com.au/products/general-accessories/tyre-accessories/

  BD

[lindamc]

thanks BD mine is an autobarn one

Sent from my GT-I9100T using Tapatalk 2

[Wato]

i have a tyre repair kit, but what makes a good one?

Sent from my GT-I9100T using Tapatalk 2

Knowing how to use it,,,,,,,

[Black Diamond]

Knowing how to use it,,,,,,,

Pretty easy. If your not sure YouTube it

[lindamc]

aahhh, well I would not have a clue how to use it, but I did google it last week and watched a clip    I'm pretty sure that does not make me an expert yet until I have to actually use it!

[scarps]

Pretty easy. If your not sure YouTube it

agree, I'd only ever fixed bike tyre tubes before in my lifetime.
After 2 x punctures and using the Bushranger repair kit I bought, reckon it's easier than the bike tyres.
As long as you can find the puncture and it's not an inch long:-)