Author Topic: What did you do in your shed / man cave today? (Read 1976539 times)

LuckyDog · « **Reply #2600 on:** January 05, 2016, 03:49:11 PM »

Quote from: feisty on January 02, 2016, 06:11:13 PM

I borrowed an air version from an engineer mate. Was brilliant. So easy with the nutserts flush. Loved the principle so much I bought a rivet type one but have yet to use it.

ok thanks fiesty

LuckyDog · « **Reply #2601 on:** January 05, 2016, 03:50:46 PM »

Quote from: noel_w on January 02, 2016, 09:45:09 PM

I have a largish job I have to do on my canopy (50-60 nutserts) so I bought the tool below. Works like a charm.
Pity I didn't know yesterday as I was out your neck of the woods Luckydog. If you are in town anytime and want to have a look at it give me a yell. Always a coldie in the fridge too.
http://dafra.com.au/shop/rivnut-tools/drnca4210/

thanks noel, i will call in for a look and a

if i am in town thats for sure mate

Swannie · « **Reply #2602 on:** January 05, 2016, 08:28:07 PM »

Gave Bruiser my style of detail (1st since I owned him) and very happy that there is no longer a speck of dust on him

Swannie

NewieCamper · « **Reply #2603 on:** January 06, 2016, 08:25:53 PM »

After fixing the old roller door opener twice, at about half hour the second time with fiddly impossible to get to bolts I ordered a couple of new ones last week. Fitted the new opener today, not to hard but had to trim one of the door spokes to make the opener fit which too, an extra 20 min or so. But the rest was a doddle.

Then in the rush to clear out the car space of stuff so my wife could drive in when she got back home managed to leave the door half way down (up?) and smashed my head on it on the way out to the bin. Idiot, nice lump and a graze on the forehead.

At least I got to tell others when we went out for dinner that "I walked into a door" so they thought it was more likely to be domestic related which was a bit funny. Not that I condone domestic violence or would make light of it if it was a reality in my situation.

speewa158 · « **Reply #2604 on:** January 06, 2016, 08:37:12 PM »

Quote from: NewieCamper on January 06, 2016, 08:25:53 PM

After fixing the old roller door opener twice, at about half hour the second time with fiddly impossible to get to bolts I ordered a couple of new ones last week. Fitted the new opener today, not to hard but had to trim one of the door spokes to make the opener fit which too, an extra 20 min or so. But the rest was a doddle.

Then in the rush to clear out the car space of stuff so my wife could drive in when she got back home managed to leave the door half way down (up?) and smashed my head on it on the way out to the bin. Idiot, nice lump and a graze on the forehead.

At least I got to tell others when we went out for dinner that "I walked into a door" so they thought it was more likely to be domestic related which was a bit funny. Not that I condone domestic violence or would make light of it if it was a reality in my situation.

But is the door OK

LuckyDog · « **Reply #2605 on:** January 06, 2016, 08:51:42 PM »

Lmao speewa

Sent from my ZTE T83 using Tapatalk

lino6 · « **Reply #2606 on:** January 06, 2016, 09:40:28 PM »

Spent a couple of hours trying to remove the starter that decided to die in the old Rodeo. After deciding I'd never get it off I decided to take it in to my mate's work tomorrow and let him deal with it. Always handy 2 days before the planed trip in the old ute....

scarpsD40 · « **Reply #2607 on:** January 06, 2016, 09:46:31 PM »

Quote from: lino6 on January 06, 2016, 09:40:28 PM

Spent a couple of hours trying to remove the starter that decided to die in the old Rodeo. After deciding I'd never get it off I decided to take it in to my mate's work tomorrow and let him deal with it. Always handy 2 days before the planed trip in the old ute....

how did you start it?

lino6 · « **Reply #2608 on:** January 06, 2016, 09:49:30 PM »

Quote from: scarpsD40 on January 06, 2016, 09:46:31 PM

how did you start it?

I used the force!

Actually it'll tow start

Nay-DMAX · « **Reply #2609 on:** January 07, 2016, 12:29:50 PM »

Quote from: scarpsD40 on January 06, 2016, 09:46:31 PM

how did you start it?

I tow started it before I went to work cause thats how we roll haha

xcvator · « **Reply #2610 on:** January 07, 2016, 02:09:38 PM »

I found the floor in my shed

scarpsD40 · « **Reply #2611 on:** January 07, 2016, 02:52:02 PM »

Quote from: xcvator on January 07, 2016, 02:09:38 PM

I found the floor in my shed

did you fall over? Face first? You ok?

xcvator · « **Reply #2612 on:** January 07, 2016, 07:07:16 PM »

Quote from: scarpsD40 on January 07, 2016, 02:52:02 PM

did you fall over? Face first? You ok?

Yeah all ok, I just tidied up a bit

dales133 · « **Reply #2613 on:** January 07, 2016, 07:12:05 PM »

Lol i cant event find the way to my shed at the moment.
Was going to clean up this weekend but i hear the snapper snaping

NewieCamper · « **Reply #2614 on:** January 07, 2016, 07:20:58 PM »

Quote from: speewa158 on January 06, 2016, 08:37:12 PM

But is the door OK

It said it was sorry, and if would never happen again. So I've left it attached to the garage, and it still lets the car in and out, if we ask it nicely.

archer63 · « **Reply #2615 on:** January 07, 2016, 07:31:11 PM »

Spent hours moving 3 pallet loads of pool retaining wall bricks from the front yard to the back by my box trailer.
Could only manage one layer of the bastards at a time by myself as the trailer had to be pushed up and over a raised section of concrete.

I'm absolutely stuffed !!

Cheers
Rob

Diesel Power · « **Reply #2616 on:** January 07, 2016, 07:49:40 PM »

Resprayed the rear wheel arches of the cruiser after i replaced the brake fluid. Its amazing what damage stones can do to wheel arches and trailer suspension.
Regards

lino6 · « **Reply #2617 on:** January 08, 2016, 07:39:05 AM »

Started putting together a 12v cooler (inspired by pics on stalkbook). Might give it a try and see if it works. If so I might put some duct hose and a vent to split the cool air towards 2 camp chairs.

tappa tappa tappa

LuckyDog · « **Reply #2618 on:** January 08, 2016, 07:49:15 AM »

Looks like an automated can dispenser for Speewa

Sent from my ZTE T83 using Tapatalk

plusnq · « **Reply #2619 on:** January 08, 2016, 08:33:56 AM »

Quote from: lino6 on January 08, 2016, 07:39:05 AM

Started putting together a 12v cooler (inspired by pics on stalkbook). Might give it a try and see if it works. If so I might put some duct hose and a vent to split the cool air towards 2 camp chairs.

tappa tappa tappa

Good effort. We used to use something similar as a fog cooling machine on set. The longer the path for the air to cool inside the esky the better it worked.

Rumpig · « **Reply #2620 on:** January 08, 2016, 09:21:46 AM »

Not in the shed itself, but yesterday istarted extending my carport out the side of my house. I put in the post bracket and stood the new corner post, and then removed the existing gable roll and last roofing sheet...that at was enough for day 1...lol

scrapsD40 · « **Reply #2621 on:** January 08, 2016, 09:28:36 AM »

Quote from: Rumpig on January 08, 2016, 09:21:46 AM

Not in the shed itself, but yesterday istarted extending my carport out the side of my house. I put in the post bracket and stood the new corner post, and then removed the existing gable roll and last roofing sheet...that at was enough for day 1...lol

any pics?

lino6 · « **Reply #2622 on:** January 08, 2016, 10:51:12 AM »

Quote from: LuckyDog on January 08, 2016, 07:49:15 AM

Looks like an automated can dispenser for Speewa

Sent from my ZTE T83 using Tapatalk

Nah that'd have to be 3 phase to keep up with demand

Bird · « **Reply #2623 on:** January 08, 2016, 11:05:01 AM »

searched for me drill n couldn't find it so gave up, job can wait till next time I get motivated...

Rumpig · « **Reply #2624 on:** January 08, 2016, 02:54:02 PM »

Quote from: scrapsD40 on January 08, 2016, 09:28:36 AM

any pics?

not at the moment, but will take some when I next do work on it. It's only a simple skillion roof extension...one post, one beam and about 4 rafters with battens thrown on top for the iron to sit on. If I ripped into it, it should be a days work, but that won't happen...lol. Decided to take the kids to a local water park instead today, seemed like a better idea then working in the heat.

News:

Author Topic: What did you do in your shed / man cave today? (Read 1976539 times)

scarpsD40

scarpsD40

scrapsD40