Author Topic: What did you do in your shed / man cave today? (Read 1974747 times)

lino6 · « **Reply #875 on:** October 13, 2013, 11:16:11 AM »

Servicing the baler and rake getting ready to do my hay.

Brumbypt · « **Reply #876 on:** October 13, 2013, 01:19:57 PM »

Quote from: lino6 on October 13, 2013, 11:16:11 AM

Servicing the baler and rake getting ready to do my hay.

IS there going to be a good year for hay this year or under average??

iPad with IOS 7.02 using Tapatalk HD

Nay-DMAX · « **Reply #877 on:** October 13, 2013, 04:13:45 PM »

Quote from: Brumbypt on October 13, 2013, 01:19:57 PM

IS there going to be a good year for hay this year or under average??

iPad with IOS 7.02 using Tapatalk HD

We don't do a big amount here just enough for our horses should be an ok year for us. I have chatted to some farmers in the area they are cutting at the moment so I guess we will wait and see it is the dry summer I don't look forward too.

berlitza · « **Reply #878 on:** October 13, 2013, 04:19:52 PM »

did manage to finish the led's off with the clear heat shrink and new solder, gotta decide what i'm going to do with the other 15ft of the stuff

D4D · « **Reply #879 on:** October 13, 2013, 04:22:24 PM »

Watched Bathurst and talked crap with Brett B and fuji

Brett B · « **Reply #880 on:** October 13, 2013, 04:58:56 PM »

Quote from: D4D on October 13, 2013, 04:22:24 PM

Watched Bathurst and talked crap with Brett B and fuji

and put up with crap Melb weather

lino6 · « **Reply #881 on:** October 13, 2013, 06:32:46 PM »

Quote from: Brumbypt on October 13, 2013, 01:19:57 PM

IS there going to be a good year for hay this year or under average??

Should get around 200 small squares off our place this year, so not too bad. But the dry and warm end of winter/start of spring and the wind we have had drying stuff will probably be down a little bit around our area.

So the baler is somewhat sorted. Rake is itching to get out there and do some work. Now to align the time and the motivation at a time everything is dry and I will be into it!

berlitza · « **Reply #882 on:** October 16, 2013, 05:05:35 PM »

Started ripping out the fluro's to replace with led's,, bloody big a&^%d spiders everywhere

Brumbypt · « **Reply #883 on:** October 16, 2013, 06:05:38 PM »

Cleaned and polished my new mower ready for its first service tomorrow. or soon.

iPad with IOS 7.02 using Tapatalk HD

Hairs · « **Reply #884 on:** October 16, 2013, 06:10:37 PM »

Quote from: Brumbypt on October 16, 2013, 06:05:38 PM

Cleaned and polished my new mower ready for its first service tomorrow. or soon.

Another one to add to your post count

Brumbypt · « **Reply #885 on:** October 16, 2013, 06:17:55 PM »

What, why make that sort of comment..

I am offended.. hahahahhaha....................NOT..

iPad with IOS 7.02 using Tapatalk HD

Hairs · « **Reply #886 on:** October 16, 2013, 06:29:19 PM »

GanG · « **Reply #887 on:** October 16, 2013, 08:10:42 PM »

Soldered the anderson plugs onto my new watt meter from Mandrakes

then dragged out the panels to test them in the dying light of late afternoon

Brumbypt · « **Reply #888 on:** October 18, 2013, 06:33:03 PM »

Took the deck off my new mower to look for the grease nipples on the spindle, found them after looking for a while. so greased them and the other things that needed a spray..

also greased the deck wheels..

turned it upside down and sharpened the blades with the angle grinder.

then got carried away and scrapped off all the grass, then got even more carried away after I wire brushed the hard to get off grass, I gave the underneath of the deck a spray paint. Yes its barley done 8 hours work and I have painted the underneath of the deck already..

I saw a deck that was all rusty when I was picking up my new mower and thought I don't what mine to look like that ever, So I hope I keep painting it and keep it looking nice.

then refitted the deck before I forgot how it goes on..

iPad with IOS 7.02 using Tapatalk HD

muzza01 · « **Reply #889 on:** October 18, 2013, 07:30:54 PM »

Quote from: Brumbypt on October 18, 2013, 06:33:03 PM

Took the deck off my new mower to look for the grease nipples on the spindle, found them after looking for a while. so greased them and the other things that needed a spray..

also greased the deck wheels..

turned it upside down and sharpened the blades with the angle grinder.

then got carried away and scrapped off all the grass, then got even more carried away after I wire brushed the hard to get off grass, I gave the underneath of the deck a spray paint. Yes its barley done 8 hours work and I have painted the underneath of the deck already..

I saw a deck that was all rusty when I was picking up my new mower and thought I don't what mine to look like that ever, So I hope I keep painting it and keep it looking nice.

then refitted the deck before I forgot how it goes on..

iPad with IOS 7.02 using Tapatalk HD

So when do we get to see some pics?

Brumbypt · « **Reply #890 on:** October 18, 2013, 11:28:02 PM »

Thats the old mower that I sold..

There she is..

And in the background is another Heavy duty offroad trailer on the workbench waiting to be finished..

Might even turn it into a camper if it doesn't sell.. its a 7x4.5... 18inch sides.

iPad with IOS 7.02 using Tapatalk HD

speewa158 · « **Reply #891 on:** October 19, 2013, 05:22:51 AM »

Rust on the deck

painting the bare metal ,

you have got way to much time on your hands . Mine don't rust cause they havnt got time to cause they are in motion most of the time .
You will have to remove the blades to sharpen them with a bench grinder , you really do the hack job with an angle grinder

Looks like a sweet ride , ,,,show us your cup holder

GeoffA · « **Reply #892 on:** October 19, 2013, 05:32:50 AM »

Quote from: D4D on October 13, 2013, 04:22:24 PM

........talked crap with Brett B and fuji

....and it would have been top quality crap, too.......

speewa158 · « **Reply #893 on:** October 19, 2013, 05:39:17 AM »

Quote from: GeoffA on October 19, 2013, 05:32:50 AM

....and it would have been top quality crap, too.......

& that's coming from a Bloke that really knows CRAP well

GeoffA · « **Reply #894 on:** October 19, 2013, 05:42:30 AM »

Quote from: speewa158 on October 19, 2013, 05:39:17 AM

& that's coming from a Bloke that really knows CRAP well

Brumbypt · « **Reply #895 on:** October 19, 2013, 07:55:51 AM »

no no, mine wasnt rusty, I wanted to put a coat of paint on the inside of the deck to help the grass fall off easier, I wont do it every time, well not with a spray can, too expensive. almost a can of spray paint.

And I used a Flap disk on my 125 angle grinder, the job I did was extremely neat, no hack job there..
The flap disk is a little more gentler than a straight grinding disk and the finished work is smooth..

(I like to finish my grinding (of other jobs and where its touched regularily when the jobs finished) with the flap disk. No grinding marks and polishes up the steel and welds and looks great.)

iPad with IOS 7.02 using Tapatalk HD

Jeepers Creepers · « **Reply #896 on:** October 20, 2013, 06:51:47 AM »

I think i'm gunna have to pull the head off the work van today.
Getting the tiniest bit of coolant into the number 6 chamber.

DaveR · « **Reply #897 on:** October 20, 2013, 07:36:19 AM »

Made and extension lead with Anderson Plugs on each end from a broken set of jumper leads.
I am yet to fit batteries to the CT, so this allows me to park the Tug away from the CT a short distance.

Brumbypt · « **Reply #898 on:** October 20, 2013, 07:43:07 AM »

welded on the A frame to the next trailer, went over a few welds, then took it off the workbench and put it on the floor ready to fit the wheels and flip over.

iPad with IOS 7.02 using Tapatalk HD

Brett B · « **Reply #899 on:** October 20, 2013, 08:33:10 AM »

Quote from: GeoffA on October 19, 2013, 05:42:30 AM

& that's coming from a Bloke that really knows CRAP well

And when you talk crap long enough it turns into good sh#t

News:

Author Topic: What did you do in your shed / man cave today? (Read 1974747 times)