Author Topic: What did you do in your shed / man cave today? (Read 1975604 times)

Jeepers Creepers · « **Reply #5350 on:** April 22, 2020, 05:07:39 AM »

Just a couple more, including the car its going in.

A quick hit with some matt clear and the outside paint is done.

We have a full rubber kit on hand, to go with the new suspension, brakes and steering.
The interior will be as ratty as the outside.
This ol tub will be as safe as houses to drive, but its gunna draw some dirty looks in the traffic.

Some pics on the previous page as well.

Fizzie · « **Reply #5351 on:** April 22, 2020, 08:00:32 AM »

Quote from: tryagain on April 13, 2020, 03:37:03 PM

So the shed tidy up involved a trip to the tip, in that load I threw the old firepit as the leg supports were rusted., but that has meant no fire for the last week or so. I have always wondered if the 3mm perforated aluminium sheet that my brother left here over 10yrs ago would work for a firepit, or if the aluminium would melt due to the heat.

Well, tonight I get to find out, I think it will look better once the white powder coast burns off (before it possibly melts ), the bass is stainless from the camper kitchen from when made the cutout for the stove. All things considered it cost me nothing but time

So how'd it go, TA

Did it work, or turn into a little puddle of molten aluminium

noel_w · « **Reply #5352 on:** April 22, 2020, 01:16:16 PM »

Quote from: Hairs on April 18, 2020, 07:32:52 PM

Walked in ti my shed,
Added more empties to the mounting pile that needs to be taken to the 'Return & Earn' machines.
They are closed, Covid19.
Maybe when this ends, It(10 cents a item) might pay for the Ferry ride to Tas for our next National Meet

Gees Hairs I thought you would have enough for a 1st class trip around the globe.

Pottsy · « **Reply #5353 on:** April 22, 2020, 02:45:05 PM »

Finished these this morning, customer order for his earth moving office, prime mover, dolly, drop deck just on 1350mm long, grader and scraper approx 475mm long.
Drop axle on prime mover behind sleeper, grader blade rotates and lifts, scraper bucket tilts and opens. About 35 hours work in total.

jk · « **Reply #5354 on:** April 22, 2020, 03:08:03 PM »

Once again, brilliant work mate

Fizzie · « **Reply #5355 on:** April 22, 2020, 04:20:38 PM »

Unbelievably so

Hairs · « **Reply #5356 on:** April 22, 2020, 06:26:15 PM »

Quote from: noel_w on April 22, 2020, 01:16:16 PM

Gees Hairs I thought you would have enough for a 1st class trip around the globe.

Bank manager just rang,
He said if I was planning a trip,
"Don't go any further than the driveway"
Bastard

Come Saturday morning at 6am, I will be standing at my driveway, as a show of respect.
Since we can't attend the dawn service in Lawrence, as I have done for nearly 21 years.
Take care Mate.

Hairs · « **Reply #5357 on:** April 22, 2020, 06:30:59 PM »

Thank you to guys that post pics of your craft, handy work, hobbies.
Wish I had the time.
Cheers guys.

Robbo · « **Reply #5358 on:** April 22, 2020, 06:44:24 PM »

Pottsy, that is absolutely brilliant. You are indeed a craftsman. Do you leave them raw or give them a light coating of linseed oil?

Sent from my SM-J600G using Tapatalk

D4D · « **Reply #5359 on:** April 22, 2020, 06:50:40 PM »

Building another trolley for the sister-in-law. Finally got my drop saw back which made the job way easier.

Pottsy · « **Reply #5360 on:** April 22, 2020, 06:59:23 PM »

Quote from: Robbo on April 22, 2020, 06:44:24 PM

Pottsy, that is absolutely brilliant. You are indeed a craftsman. Do you leave them raw or give them a light coating of linseed oil?

Sent from my SM-J600G using Tapatalk

Hi Robbo, I coat them with a beeswax/mineral oil mix that I make, 1 part beeswax to 4 parts mineral oil by weight creates a soft polish. I brush it on, leave for 10 minutes and then rub and wipe off with paper towel. Reduce mineral oil ratio for a harder polish.
Non toxic, so ideal for toys.

Fizzie · « **Reply #5361 on:** April 23, 2020, 10:35:54 AM »

Quote from: Hairs on April 22, 2020, 06:26:15 PM

Come Saturday morning at 6am, I will be standing at my driveway, as a show of respect.

Yep, we'll be doing the same.

Have the Last Post, a minute silence, then Rouse taped from when I ran the Dawn Service, so will hook them up to a portable speaker & also run that. Won't be loud, but should sound good.

westvic · « **Reply #5362 on:** April 23, 2020, 11:51:55 AM »

Quote from: Fizzie on April 23, 2020, 10:35:54 AM

Yep, we'll be doing the same.

Have the Last Post, a minute silence, then Rouse taped from when I ran the Dawn Service, so will hook them up to a portable speaker & also run that. Won't be loud, but should sound good.

ABC doing a live broadcast of National Memorial Service from War Memorial at 5:30am

https://www.abc.net.au/radio/sydney/anzac-day-2020/12133324

bmwfreak · « **Reply #5363 on:** April 24, 2020, 05:23:41 PM »

Isolation project(s)

Not in the shed and not today (about 5 weeks worth, of which 90% was waiting between coats of Sikkens to dry), but did involve workshop jobs. We decided to rebuild/renovate the bay windows. They were the only windows on the house that weren’t replaced by the previous owners when they extended the house back in ‘06.

Because we were staining and clear coating we had to replace the putty with quad. It also matches the rest of the windows now.

Pinning the quad on

Triton portable clamping stations work a treat.

The finished product (we will need to do the eave at some stage, but getting the windows, frames and sill completed was the short term goal.

When I say we, I mean Bronny (the wife) and myself. Bronny did a great job sanding detail stuff and ‘painting’.

Cheers, Bruce

Sent from my iPad using Tapatalk

D4D · « **Reply #5364 on:** April 24, 2020, 05:37:11 PM »

Very nice, they've come up great!

bmwfreak · « **Reply #5365 on:** April 24, 2020, 05:41:04 PM »

Follows on from the previous isolation post.

The inside of the bay windows was also a mess, so....

Luckily the BGS had the profile for the window surround. Only down side is that it is finger jointed, which isn’t quite covered by the stain we used.

I added some pine ‘shoulders’ so we can attach magnetic flip screens.

Our next job is the four french doors out the back, and then rejuvenate all of the western red cedar windows and frames. Hopefully the isolation rules will stay in place until we have finished, as the bay windows were started almost 2 years ago

Cheers, Bruce

Sent from my iPad using Tapatalk

fisher · « **Reply #5366 on:** April 24, 2020, 05:49:57 PM »

A bit more scrap metal 'art'

D4D · « **Reply #5367 on:** April 25, 2020, 01:18:15 PM »

Trolley x2 finished. I used decking stain this time, not as shiny as the stain & varnish I used before so it is perfect for photos.

Pottsy · « **Reply #5368 on:** April 25, 2020, 02:54:53 PM »

Bmwfreak, fisher andD4D, nice work there fellas, hopefully that has scored you all some brownie points.

D4D · « **Reply #5369 on:** April 25, 2020, 02:59:30 PM »

Quote from: Pottsy on April 25, 2020, 02:54:53 PM

Bmwfreak, fisher andD4D, nice work there fellas, hopefully that has scored you all some brownie points.

Yeah for 5 minutes, now SWMBO wants a coffee table...

bmwfreak · « **Reply #5370 on:** April 25, 2020, 04:42:56 PM »

Quote from: Pottsy on April 25, 2020, 02:54:53 PM

Bmwfreak, fisher andD4D, nice work there fellas, hopefully that has scored you all some brownie points.

D4D, at least I got the morning off, before having to start the next job the missus wanted completed, a window seat for the bay window area, ‘now that it looks so much better’. Camphor laurel coffee table cut and shut to suit the alcove.

I have a section of the table left over to do a back rest, tomorrow.

DrewXT · « **Reply #5371 on:** April 25, 2020, 11:45:34 PM »

Unscrewed the top off my work bench so the daughter has something to practice her tap dancing on...

Option B was the tiled floor, which wasn't going to happen...

Next bench will be a steel top, so I can weld on it

Sent from my Pixel 3 XL using Tapatalk

bagpuss · « **Reply #5372 on:** April 26, 2020, 07:36:03 PM »

Made from scrap wood just needs sanding and some stain Plus I have some new tiles for the inside area just need a tile cutter

Pottsy · « **Reply #5373 on:** April 26, 2020, 07:44:36 PM »

Bagpuss, great idea, looks like a future project. Great build.

D4D · « **Reply #5374 on:** April 26, 2020, 07:45:53 PM »

Lots of great #isoDIY

I've got a couple more ideas to get stuck into over the next few weeks.

News:

Author Topic: What did you do in your shed / man cave today? (Read 1975604 times)