Author Topic: WHAT TYPE OF SUSPENSION DOES YOUR CAMPER RIDE ON POLL? (Read 114883 times)

Steinzy · « **Reply #75 on:** September 02, 2013, 07:38:30 PM »

Currently have original leaf slipper springs on my 1980 jayco dove. Tossing up about changing to eye rebound leafs or an alko torsion style setup....any advice??

christover1 · « **Reply #76 on:** September 02, 2013, 07:42:40 PM »

Shackle springs and add shocks could be another option.

Steinzy · « **Reply #77 on:** September 02, 2013, 07:48:06 PM »

Quote from: christover1 on September 02, 2013, 07:42:40 PM

Shackle springs and add shocks could be another option.

Is it worth the hassle of adding shocks or will a decent rebound leaf offer a similar end result?

christover1 · « **Reply #78 on:** September 02, 2013, 07:57:03 PM »

Depends on what you want to achieve.
And intended use, what space you have underneath etc.
Shocks are needed if you opt for a softly sprung shackle spring(or coils).
Rebound spring is the easiest option.
I like the alko rubber for simplicity.
Dampening is kind of built in with alko.
PS. Just my opinions, I am no mechanic.
I tried slipper springs, rebound springs, then tried shackle springs with shocks.
Suited my needs, but your needs could differ, of course.

Steinzy · « **Reply #79 on:** September 02, 2013, 09:17:17 PM »

Quote from: christover1 on September 02, 2013, 07:57:03 PM

Depends on what you want to achieve.
And intended use, what space you have underneath etc.
Shocks are needed if you opt for a softly sprung shackle spring(or coils).
Rebound spring is the easiest option.
I like the alko rubber for simplicity.
Dampening is kind of built in with alko.
PS. Just my opinions, I am no mechanic.
I tried slipper springs, rebound springs, then tried shackle springs with shocks.
Suited my needs, but your needs could differ, of course.

I appreciate your opinion. I have been swaying towards the alko torsion axle as I have a mate pulling one off a boat trailer...however am concerned that I believe they are not a serviceable item.

christover1 · « **Reply #80 on:** September 02, 2013, 09:38:38 PM »

I don't think there is much that can go wrong on the alko set up.
If it is free or cheap, and the right ride height and track width for you, it is worth a try.
Can always change it out if you hate it.

iantz · « **Reply #81 on:** September 05, 2013, 10:03:57 PM »

It's interesting that the industry keep pushing independent suspension systems, yet 60% of us are running solid axle leaf setups!

rodsswag · « **Reply #82 on:** September 15, 2013, 09:38:51 AM »

7 leaf Al-Ko.
45mm square.
Parallel bearings.

Rod.......

bobkay · « **Reply #83 on:** October 21, 2013, 03:19:35 PM »

Quote from: Raptor 1 on March 08, 2012, 08:12:36 PM

Hi boys and girls, I have a desert edge with independant rubber and i wouldn't p..s on it if it was on fire. You need to have it fully loaded to work properly otherwise it bounces around too much and recks your gear inside.

Hi guys (and ladies) first post for me. I've been a member for awhile and been busy doing a lot of reading/research as I'm about to build a camper, well modify and renovate an old cub I have. I've found it very helpful for info and advice Tx, great site. In fact one reason I've taken so long to get started is, every time I read a topic I see another great idea I'd like to incorporate.

I have the independent rubber suspension on my work trailer and it works really well (because it's pretty well loaded all the time) so when I built a box trailer to cart a load of fire wood etc, I used the same suspension and found the same problem Raptor describes. I realised they have no progressive loading and so if you have it set up take a load, anything below that they are useless, in fact I usually carry large drums of water in mine if empty simply to stop it bouncing all over the place at speed. I wouldn't write them off though as the other trailer works well.

Cheers
Bob

DirtyJ · « **Reply #84 on:** January 05, 2014, 07:32:17 AM »

Shocks with leaf springs definitely make a difference over rebound springs.
Our grain feeder trailer is on the fourth set of suspension. First was slipper which wore through the slip pads and chassis and bounced everywhere. Second was rebound springs which were better but it still bounced around. We changed again when we decided to fit bigger tyres when we had to start getting over more rocky area. It now has land cruiser shackle springs and large bore shocks. I'm really surprised how well it sits over some rough terrain.

My 2c, if you're going to the effort of re mounting springs, add shocks as well.

Sent from somewhere I wish I wasn't, using Tapatalk

RLI · « **Reply #85 on:** March 06, 2014, 07:17:54 PM »

G'day Lounge Lizards!

I have retrofitted cruise-master independent suspension on my 2004 Jayco Hawk Off-road camper.

PS, i will start my camper trailer thread soon.

Regards,

RLI

loanrangie · « **Reply #86 on:** April 09, 2014, 02:06:37 PM »

Al-ko independent on my new (old ) dingo offroad camper trailer, cant really comment on the ride or handling apart from towing it from Moe to St Helena via Noojee/ Yarra Junction. Towed nicely just the same, i wasnt specifically after independent suspension but happy to have it if it works.

Pirate_Pete · « **Reply #87 on:** June 28, 2014, 08:53:06 PM »

1500Kg Gaffa under my Downunder Camper. Was a breeze across the Old Cork Rd & the Loop Track at Kroombit Tops.

BMPatriot · « **Reply #88 on:** February 04, 2015, 06:13:58 PM »

running on twin shock independent trailing arm with coil spring! tows like a dream over everything I've hit so far.

Peter The Greek · « **Reply #89 on:** March 11, 2015, 02:28:14 PM »

I am interested in building up trailer with asymmetric trailing link suspension / MC2. Does anyone know if there are any kits out there for this?

I can't seem to find much. Trak told me they'd sell me a Mate Chassis for $7-8k....don't know if that's good value or not?

Rocky and Bullwinkle · « **Reply #90 on:** July 23, 2016, 01:25:21 PM »

Trackabout Safari SV with the independent suspension.

Greg

yogi · « **Reply #91 on:** July 25, 2016, 08:02:21 PM »

Need to re vote or vote more than once as I have a new toy

yogi

Joff · « **Reply #92 on:** July 25, 2016, 08:08:31 PM »

Im glad to see leaf springs still hanging in there

glenm64 · « **Reply #93 on:** July 25, 2016, 08:25:18 PM »

Im running independant trailing arm, air bags and twin Rancho RS9000's.
Van rides like a dream over all surfaces, and I can drop height and level van with it on setting up camp.
Wouldnt have anything else if I had to start again.

Cheers Glen

Old65 · « **Reply #94 on:** September 07, 2016, 06:56:21 PM »

Square 45mm axle with leaf slippers.Added shock absorbers for Gunbarrel Hwy trip but never gave a problem without them on the Gibb,Tanami Rd etc.Tows straight and I never see the camper bounce.

peterkb · « **Reply #95 on:** September 07, 2016, 10:33:36 PM »

New Breakaway came with Vehicle Components independent.

BUT .... I would be happy with Alko rebound leaf. NO shocks needed although it doesn't really make things worse.

Sent from my iPhone using Tapatalk

GeoffA · « **Reply #96 on:** April 10, 2020, 01:59:30 PM »

Could the mods add a "Tandem Air Bag" option please?

GGV8Cruza · « **Reply #97 on:** April 10, 2020, 04:43:06 PM »

Quote from: GeoffA on April 10, 2020, 01:59:30 PM

Could the mods add a "Tandem Air Bag" option please?

Done bud, is it here yet

GG

GeoffA · « **Reply #98 on:** April 10, 2020, 05:03:43 PM »

Quote from: GGV8Cruza on April 10, 2020, 04:43:06 PM

Done bud, is it here yet

Not yet GG, but it is progressing. Still a couple of weeks away....

Thanks for adding to the list.

News:

Poll

What type of suspension does your camper ride on?

Author Topic: WHAT TYPE OF SUSPENSION DOES YOUR CAMPER RIDE ON POLL? (Read 114883 times)