Author Topic: Tube Sealant products for push bikes  (Read 3186 times)

0 Members and 1 Guest are viewing this topic.

Offline Beachman

  • Hard Top Camper User
  • ******
  • Posts: 1571
  • Thanked: 130 times
  • Gender: Male
Tube Sealant products for push bikes
« on: June 20, 2016, 04:00:15 PM »
Hi All,

As my kids are getting older they are getting into bike riding, so I’m finding we are riding further and more often. On the weekend we rode for 13kms along a bike path before coming across a broken bottle. While myself and my son managed to go around the glass, my daughter got the edge. Knowing I didn’t have any repair tools on hand we turned around and rode back just in case she got a slow puncture.

Luckily she didn’t get a flat tyre, but it made me think about my options should the worse happen as 13kms is a long way to walk pushing a bike.

I did a quick Google search and did come across some green liquid you put into the tube which patches small holes as you ride. Just wondering if anyone has used these products and are they are any good?

Thanks

Brett

Offline tk421

  • Hard Floor Camper User
  • *****
  • Posts: 1050
  • Thanked: 108 times
  • Gender: Male
    • Out of the Office... Road trips round Australia
Re: Tube Sealant products for push bikes
« Reply #1 on: June 20, 2016, 04:33:09 PM »
I just take a couple of spare tubes, a patch repair kit and some CO2 cartridges in my backpack. I've never trusted the sealant stuff, not from a bad experience mind you. I've used it in a car tire a few years ago and it got us home. It doesn't take that long to swap a tube. Granted it's harder if you've got several different tire sizes to deal with.

To my mind a tube covers you for everything including larger holes and damaged valves. (Unlikely I know,  but I've done it).
“It is good to have an end to journey toward; but it is the journey that matters, in the end.”  - Ernest Hemingway

Offline Burnsy

  • Hard Top Camper User
  • ******
  • Posts: 1971
  • Thanked: 30 times
  • Gender: Male
Re: Tube Sealant products for push bikes
« Reply #2 on: June 20, 2016, 04:34:28 PM »
I use sealant (stans brand) in my mountain bike but run tubeless. You can put sealant into tubes as well, does work, I think you can even buy the green stuff at Kmart. I find best bet for my kids bikes is to carry a mini pump, set of plastic levers and a packet of scabs (puncture repair stickers - require no messing around with glue). Thing with sealant is it goes off over time so you need to top up/add more every six months.

2016 GXL 200 Series Cruiser and Modified 2001 TL8 Camprite

Offline Burnsy

  • Hard Top Camper User
  • ******
  • Posts: 1971
  • Thanked: 30 times
  • Gender: Male
Re: Tube Sealant products for push bikes
« Reply #3 on: June 20, 2016, 04:36:28 PM »
Agree with TK if you have multiple kids using the same size wheel, carry a spare tube as well as scabs. Mine are still all on different sizes though so scabs saves me carrying 4 different tubes.
2016 GXL 200 Series Cruiser and Modified 2001 TL8 Camprite

Offline #jonesy

  • Hard Floor Camper User
  • *****
  • Posts: 1326
  • Thanked: 163 times
  • Gender: Male
Re: Tube Sealant products for push bikes
« Reply #4 on: June 20, 2016, 04:41:29 PM »
I started using these sort of tyre liners on my mountain bike and never had a puncture since. Prior to using it I was regularly riding in a park that I would pick up thorns. After putting them in it wasn't a problem.
Can't remember which brand I used but it was like these.
http://m.torpedo7.co.nz/products/ZFTGSNNTG/title/zefal-tyre-liner-mtb-bmx--18----green
2013 Aussie Jays - Crusher      2013 Toyota Hilux. 

Offline austastar

  • Hard Top Camper User
  • ******
  • Posts: 4171
  • Thanked: 334 times
  • Gender: Male
Re: Tube Sealant products for push bikes
« Reply #5 on: June 20, 2016, 04:49:40 PM »
Hi,  I used the green goo for years commuting. It sealed lots of small leaks from nails, glass etc. The Green goo would ooze out beside the intrusion and seal the leak.
Recomend it.
Cheers

Sent from my GT-N5110 using Tapatalk


Offline RonnieQ

  • Swag User
  • **
  • Posts: 76
  • Thanked: 15 times
  • Gender: Male
Re: Tube Sealant products for push bikes
« Reply #6 on: June 20, 2016, 04:49:43 PM »
Mr Tuffy Tire liners and thorn proof tubes.
You pay a bit of a weight penalty but they are pretty well impenetrable with that combination.
I run that combo on my mountain  bike.

Sent from my SM-G920I using Tapatalk

{IMG}{IMG}

Offline GBC

  • Hard Top Camper User
  • ******
  • Posts: 1984
  • Thanked: 325 times
Re: Tube Sealant products for push bikes
« Reply #7 on: June 20, 2016, 05:00:53 PM »
Green goop seals up goats head burrs and spoke rubs.  I like it on kids bikes.

Offline Nomad

  • Hard Top Camper User
  • ******
  • Posts: 2622
  • Thanked: 94 times
  • Gender: Male
Re: Tube Sealant products for push bikes
« Reply #8 on: June 20, 2016, 05:47:57 PM »
Get yourself some thorn proof bike tubes. They work very well.

Offline NewieCamper

  • Soft Floor Camper User
  • ****
  • Posts: 520
  • Thanked: 38 times
  • Gender: Male
Re: Tube Sealant products for push bikes
« Reply #9 on: June 20, 2016, 07:00:36 PM »
I'd get some tyre liners. I use mr Tuffy ones on my commuter and have only had one problem in a few years. Take a mini pump and spare tube on rides as emergency spares.

Offline glenm64

  • Hard Top Camper User
  • ******
  • Posts: 1948
  • Thanked: 495 times
  • Gender: Male
Re: Tube Sealant products for push bikes
« Reply #10 on: June 20, 2016, 07:51:16 PM »
I lived in Geraldton for years, thorn capital. Punture proof tubes last a day if lucky.
The green slime that has fiberous material in it works a treat. Did all 4 bikes. Never had to worry about puntures after that.

Cheers Glen

There's a big difference between kneeling down
......... and bending over.

Offline NewieCamper

  • Soft Floor Camper User
  • ****
  • Posts: 520
  • Thanked: 38 times
  • Gender: Male
Re: Tube Sealant products for push bikes
« Reply #11 on: June 20, 2016, 09:39:47 PM »
Should add that before I put tyre liners in I was regularly getting Pinterest on my commute. The concrete path I use has metal fibre reinforcing which wears out and ends up sticking into the tyres and working its way into the tube. I once pulled ten fibres out of a tyre that copped a flat. That's when I decided I needed the tyre liners.