Storage box security

[Craigandmelanie]

Hi all
Looking at purchasing a Pelican plastic storage box from Bunnings for BBQ and anything else that will fit.
It will be up visible on the storage area of the camper and was wondering what you guys have used to secure.
I am planning on using ratchet tie downs while travelling but was thinking about a way to give us some permanent security/deterrent while parked up sightseeing etc.
Maybe a locking type turnbuckle but I'm not even sure they exist
Any help much appreciated
Cheers 
Craig

[plusnq]

Sadly with portable power tools, there is no such thing as security. If they want it and are prepared, it will be gone. All you can do is protect against the opportunistic thief. Can you lock the box in the car when you are away?

[Craigandmelanie]

Hi Plusnq
The box we are looking at is 1200x600 so unfortunately will not fit in the back of the Cruiser
Cheers

[paceman]

i travel with two pelican cases (until my canopy comes, anyways)...

i just put a lock on each one and then i have made up a small stainless cable with loops on each end.  run one loop around one of the tie-downs in the back of the ute, loop it through the loop on the other end of the cable, run it through the handles of each of the pelican cases and then lock it up on the other side of the tub with another lock.

has worked for me.  as others have said, if they really want it, they'll get it, but the locks and cable seems to be a worthwhile deterrent for the opportunistic thief.

[juniorgc]

Have travelled a lot with a large box on the camper and never had anyone even look at going into it.  I think if you put a lock on it they will think is has valuable things in it and break in.  We tie ours down with ratchets onto the camper.

This the only thing we lock up are the kayaks which I have made up a stainless wire rope with loops on the ends and a set of padlocks the same as the one we use in the two point on the camper when we leave it.  These are more valuable at $1500 each so we try to stop the opportunistic theft.


Sent from my iPad using Tapatalk

[Rumpig]

My spacecase is attached to the trailer via 4 short chains and turnbuckles instead of ratchet straps....a mate used ratchet straps on his same camper and it ended up cracking welds on his front box, i reckon it was due to the straps stretching a touch allowing the box to move as he drove along. Never had anything taken from the box which just has one padlock on the lid, but it's only camp chairs a small cheap ladder and the levelling ramp kept in it.

[Greeny]

I had a spacecase bolted to the tray of a ute I had, only had it secured with a small padlock for a couple years without an issue then someone took a screwdriver to it (lucky it was empty at the time). I then replaced the broken buckle with a "croc lock" and a decent padlock and never had an issue again.


Sent from my iPhone using Tapatalk

[glenm64]

I have  2 on my trayback if I dont take the canopy. I bolt them to the tray with a plate on each bolt so you cant pull the bolt head through. I also changed the latches to locking ones doing away with padlocks.

Sent from my SM-T810 using Tapatalk

[Craigandmelanie]

Thanks all
Might look into the chain and turnbuckle idea
 

[GGV8Cruza]

Let me know if I can help

http://www.myswag.org/index.php?topic=6942.0

GG

[Julian Kaye]

  If you don't mind drilling holes then screws/bolts with security heads are the go, not many people carry torx head or post allen key headed screws. There's plenty of info on the web about security fasteners.

[rockygu4.8]

Just bolted two space cases onto my roof rack as suggested by Patroldude. Basically drilled some holes for u bolts to go around the rack and into the box. Some flat aluminium inside and some lock nuts to keep it in place. Still use the original holes on the box for padlocking. Pretty happy with that