MySwag.org The Off-road Camper Trailer Forum
General => General Discussion => Topic started by: ryangus on October 02, 2020, 08:04:23 AM
-
For some reason, despite most 12v chest fridges having a digital controller, it seems all the uprights have the old 'analogue' dial, that you can't key in an exact temperature. Anyone know why, or know of one with a digital controller (I can't find any)?
-
The digital controllers are pretty cheap, you could add one to a fridge if you really wanted one. Most household fridges don't have a digital controller either, not sure why that is, maybe something to do with the bigger volume?
-
I added one to an upright Waeco a f see w yrs ago. Pretty easy install.
-
Come over and look at the conversion I did on an old engel......
Easy peasy
Sent from my iPhone using Tapatalk Pro
-
I have an Evakool fridge/freezer which has a digital controller. Pretty happy with it too.
Sent from my SM-T700 using Tapatalk
-
Does a digital controller make the beer colder??
-
Bordering on ice



Sent from my SM-T700 using Tapatalk
-
What if I fit 2??... :P
If 1 is good.... ;D
-
What if I fit 2??... 
If 1 is good.... ;D
Straight through to the keeper
Sent from my SM-T700 using Tapatalk
-
What if I fit 2??... :P
If 1 is good.... ;D
Then you have redundancy!
-
Does a digital controller make the beer colder??
Yes it can.....that's why I fitted one. In warm weather, the "old" style thermostat used to get the fridge down to 1deg ( perfect for beer ), but then would go to 7 deg before cutting back in...(no good for beer ).
A digital controller could be set to cut out at 1 deg and cut back in at 2 , 3 or 5 deg.
-
Yes it can.....that's why I fitted one. In warm weather, the "old" style thermostat used to get the fridge down to 1deg ( perfect for beer ), but then would go to 7 deg before cutting back in...(no good for beer ).
A digital controller could be set to cut out at 1 deg and cut back in at 2 , 3 or 5 deg.
Did doing that make any noticeable difference to power consumption ???
-
Did doing that make any noticeable difference to power consumption ???
No, not really. With the old setup, it would take longer to cut back in, but would then run longer to get back down.
With the controller, it would run more often, but in shorter bursts.
-
Thanks!
That's what I thought, but good to have it confirmed from actual experience ;D
:cheers:
-
Look up STC1000 on ebay, they come in 12/24V or 220/240V versions. Like Gronk said you can adjust the temp and set the cut in/out variation by 1 or 2 degrees.
-
Look up STC1000
Weeds kindly gave me one of them, but it's a bit too big for where I want to mount it. I think I'll go with a 12V model of one of these instead https://www.ink-bird.com/products-PID-controller-itc100.html