MySwag.org The Off-road Camper Trailer Forum
General => General Discussion => Topic started by: jetcrew on December 07, 2015, 08:12:40 PM
-
Hi all I,m asking a favour here.. my drawing skills are up there with my writing skills :-[ :-[ :-[
I have done this with paint but its not at a standard I can give to a fabricator
here are the pics
the jerry holders are the rough idea of what i want but obv it will be a 3 can holder not a twin and the unit will still have a tapper from back to front .
If anyone can help if its not too much trouble I would be very grateful
Jet ;D ;D
-
here is a rough birds eye
-
What about a hand drawing with dimensions. If getting sent off for water/laser cutting then cad is the way to go otherwise a sketch is all you need
-
Will this help you out Jet, I took it that it would be made out of 3mm Ally plate and the 190 mm measurements are internal .. No good at CAD stuff either, pen and ruler is quicker . ;D
Can a C.A.D. pro rework this and make it prettier and not so rough, please ..
-
Will this help you out Jet, I took it that it would be made out of 3mm Ally plate and the 190 mm measurements are internal .. No good at CAD stuff either, pen and ruler is quicker . ;D
WOW Edz :cup: :cup: :cup: :cup:
Your a legend mate ? Thank you so much
Jet :D
-
I dable a wee bit in cad...................... well ok a lot ...
Todays first job is this basement in a highrise at the Goldie.
(http://i153.photobucket.com/albums/s224/smetzroth/basement_zpsduxom355.jpg) (http://s153.photobucket.com/user/smetzroth/media/basement_zpsduxom355.jpg.html)
-
He's gonna need a bigger drawbar.😬
-
Wondered about that and interested in the new ball weight after 150+kg is added.
-
I dable a wee bit in cad...................... well ok a lot ...
Todays first job is this basement in a highrise at the Goldie.
(http://i153.photobucket.com/albums/s224/smetzroth/basement_zpsduxom355.jpg) (http://s153.photobucket.com/user/smetzroth/media/basement_zpsduxom355.jpg.html)
Now that's just showing off ..lol :D
Either help out or nick off :D :D :D :D :D
Very impressive
Jet :D
-
Wondered about that and interested in the new ball weight after 150+kg is added.
When I'm done I will get you some figures to compare against the Kimberley mate :D ;D
My KK went 220ish so if I can stay below 250 I will be happy yes that more like 15-18% of tare and 10 is the wholly Grail , I am comfortable with it for now .
Weight mitigation strategies will also be employed to get that weight off the nose asap so fuel into car tanks and water into camper tanks asap I wount be tripping around the GRR with it all full all the time
Jet ;D
-
Wondered about that and interested in the new ball weight after 150+kg is added.
Lol, my comment was in reference to the concrete high rise basement going on the drawbar.🤗 All good.
-
Now that's just showing off ..lol :D
Either help out or nick off :D :D :D :D :D
Very impressive
Jet :D
hehehehe sorry had to hahaha ;-) If you still need it drawn up let me know.