MySwag.org The Off-road Camper Trailer Forum
General => General Discussion => Topic started by: Trackabout Off Road Campers on May 29, 2013, 03:46:21 PM
-
Well, after being completely inspired by darrenh's keg fire place I took things into my own hands :cup: Call me a copycat but I just had to have one.. So the next morning I woke up and to find a 50ltr stainless keg on my front door step.... Kind of... :police:
She not only looks fantastic on the back deck but works a treat also!
Here it is folks the pic's a bit dark but it’s off to the sand blasters tomorrow, was going to polish it up but i have more respect for my fingers and I reckon a sand blast finish will look nice :cheers: Dave
-
That's gold
Do you supply one with every trailer sold? :D
-
Im sure we could work something out Muzza :cheers: maybe a full one too?
-
I'm all for cutting up Multinational Kegs , BUT that one is the property of an Australian company that I quite enjoy the flavors of ..
When I get a few more posts I'll share my smoker and a few other projects from the other mobs kegs ..
Cheers
-
Awesome!
I think Muzza and I need a FNQ group deal, since it gets so cold up here...
Cheers,
Matto :)
-
When I get a few more posts I'll share my smoker and a few other projects from the other mobs kegs ..
Would like to see some pics of your smoker setup.! ?
-
cruisindub , won't be too long . lol I think its 25 post or something , so 10 too go :)
-
Where is the other 99 uses for the beer keg ?
Tjupurula
-
Well, after being completely inspired by darrenh's keg fire place I took things into my own hands :cup: Call me a copycat but I just had to have one.. So the next morning I woke up and to find a 50ltr stainless keg on my front door step.... Kind of... :police:
She not only looks fantastic on the back deck but works a treat also!
Here it is folks the pic's a bit dark but it’s off to the sand blasters tomorrow, was going to polish it up but i have more respect for my fingers and I reckon a sand blast finish will look nice :cheers: Dave
Hmmmm Dave?
You forgot that I am a copper? Ha ha ha
-
P.S.
I'll take two please.
:police:
-
P.S.
I'll take two please.
:police:
Is that one of your work cars Wayne ?
-
Noooo, that's our local div van, this is similar to ours.
-
Honestly, it just appeared Wayne, I swear :angel:
-
Fiji thats a Cool company banger , ideal for the PUB run , wont get stopped at Booze Bus & quick ( Though Stolen ) . Dose it have a Treg ???
-
No Treg, just laser, moving mode radar, on board database, two radios and one of them is a phone. Also a digitector. We have to have two yellow top Optimas. One in boot and the other in engine bay. We have this colour as well as others.
-
No Treg, just laser, moving mode radar, on board database, two radios and one of them is a phone. Also a digitector. We have to have two yellow top Optimas. One in boot and the other in engine bay. We have this colour as well as others.
Wayne, do they come in stainless? :police:
-
That would be nice. I prefer white. The grey is a nice colour.
-
Well lets see if I can now post a pic or 2 for you all .
First up I have a few that make beer
(http://i8.photobucket.com/albums/a26/fnqbunyip/2008_0509brewery0007.jpg) (http://s8.photobucket.com/user/fnqbunyip/media/2008_0509brewery0007.jpg.html)
Then there is the smoker .Its gas or coals fired , it just sits on the BBQ or the gas ring on the brewery or even inside on the gas stove , if the weather is complete crap ..
The bottom
(http://i8.photobucket.com/albums/a26/fnqbunyip/smoker/DSCF5315.jpg) (http://s8.photobucket.com/user/fnqbunyip/media/smoker/DSCF5315.jpg.html)
After the bottom I can just add the top and a lid
(http://i8.photobucket.com/albums/a26/fnqbunyip/smoker/DSCF5336.jpg) (http://s8.photobucket.com/user/fnqbunyip/media/smoker/DSCF5336.jpg.html)
or add more sections with a rack in each
(http://i8.photobucket.com/albums/a26/fnqbunyip/smoker/DSCF5323.jpg) (http://s8.photobucket.com/user/fnqbunyip/media/smoker/DSCF5323.jpg.html)
all the bits
(http://i8.photobucket.com/albums/a26/fnqbunyip/smoker/DSCF5326.jpg) (http://s8.photobucket.com/user/fnqbunyip/media/smoker/DSCF5326.jpg.html)
And a few fish wings
(http://i8.photobucket.com/albums/a26/fnqbunyip/smoker/DSCF5350.jpg) (http://s8.photobucket.com/user/fnqbunyip/media/smoker/DSCF5350.jpg.html)
The little stainless smoker is a mates that he brought down to show me , but by the time he got here I had mine cut out and cooking , lol
I didn't build the fire place but its served us well now for a good few years
(http://i8.photobucket.com/albums/a26/fnqbunyip/Daintree%20living/2011-07-10_16-06-15_804_zps13f56df1.jpg) (http://s8.photobucket.com/user/fnqbunyip/media/Daintree%20living/2011-07-10_16-06-15_804_zps13f56df1.jpg.html)
well thats a couple more uses for the 50lt stainless vessels , I've got an other project here somewhere but I'll have too dig it out ...
cheers
-
Unreal FNQ :cheers: now we're down to 98 ways :cup:
-
Here's another.
They make a perfect exhaust system silencer for stationary engines such as small diesel genset or water pump.
I fitted 1 to a 3 cyl lister engine that powered a 25 kva alternator.
The keg is set up with exhaust in and out piping, then buried in sandy DRY ground, hook up the exhaust in and out making sure the outlet is up high, presto, a perfectly quiet exhaust system.
The only sound is the engine itself, and the sound of gas running through a pipe.
The sand absorbs the vibrations in the sound, hence it is quiet.
Easy as.
-
A few more uses
;D ;D ;D
-
Doing well now, only 90 something uses to go, might get there n the not too distant future. I am very surprised that noone has yet offered to empty the contents for people so that the kegs can be recycled. I don't drink grog, so I am not offering.
Regards
Tjupurula
-
A few more uses
;D ;D ;D
great view and use of CANS there ;D
-
Love this thread !!!! thanks for starting it Mr Camper ! or can I call you Trackabout :D just love your middle names. ps like the stove better than the OZ. :cheers:
-
I've previously used them and an old door as an entertainment unit, also been used as weights. And stools, I miss Uni, 26 weeks a year 16hours a week and that was full time.
-
I have 2 cut in half long ways and one with a hinge, but they sit on a nice narrow trolley standard and i fill them with petrol for parts washing.. Well i dont fill them completely, just a litre or so..
-
My photos of my parts washer..
The trolley i got off someone else, they made and used it for taking big model trains out to his trailer..