MySwag.org The Off-road Camper Trailer Forum

General => General Discussion => Topic started by: Mallory Black on August 06, 2012, 10:56:14 PM

Title: Eggshell Overlay - which way should it go?
Post by: Mallory Black on August 06, 2012, 10:56:14 PM

Just a thought but......... which way should the smooth side be -  facing up or down??

Title: Re: Eggshell Overlay - which way should it go?
Post by: GGV8Cruza on August 06, 2012, 11:03:35 PM

We have ours bumpy side up, its the way we like it ;D

GG

Title: Re: Eggshell Overlay - which way should it go?
Post by: Paul Mac on August 06, 2012, 11:03:52 PM

I had mine with the smooth side down but i could see it as your own personal preference.

Title: Re: Eggshell Overlay - which way should it go?
Post by: Patr80l on August 06, 2012, 11:39:56 PM

Make your choice between Paul Mac and GGPatrol.   You can have the bumpy side up, or you can have the smooth side down.    We did ours both ways.

Reminds me about this crummy waiter i had once.   I asked him for a glass half full of water but the lazy bugger brought one that was half empty.

Title: Re: Eggshell Overlay - which way should it go?
Post by: speewa158 on August 07, 2012, 04:42:46 AM

What you do in the privacy of your CT is up to you .  l dont want to even think about it really  :laugh:

Title: Re: Eggshell Overlay - which way should it go?
Post by: Mallory Black on August 07, 2012, 12:57:40 PM

Only thing  I can think of is when we get sand on the bed it's harder to sweep off with the bumpy side up
thanks!

Title: Re: Eggshell Overlay - which way should it go?
Post by: Smoko on August 07, 2012, 01:01:48 PM

Nothing worse than sand on ya............bed use a dust buster to suck it off then you can have it up


 :cheers:


Smoko

Title: Re: Eggshell Overlay - which way should it go?
Post by: LJs GU on August 07, 2012, 01:31:25 PM

Smooth side down... apparently the bumps are for 'therapeutic support' (or something equally as wanky)

Quote from: Smoko on August 07, 2012, 01:01:48 PM

Nothing worse than sand on ya............bed use a dust buster to suck it off then you can have it up

All we need now is Kit-E to chime in with a 'pussy' inuendo and we've got ourselves the making of an episode...
(http://images.wikia.com/aybs/images/1/17/Cast.jpg)
LJ

Title: Re: Eggshell Overlay - which way should it go?
Post by: gibbo301 on August 07, 2012, 02:47:48 PM

Quote from: Smoko on August 07, 2012, 01:01:48 PM

Nothing worse than sand on ya............bed use a dust buster to suck it off then you can have it up  


 :cheers:


Smoko

I think i will leave that one alone  ;D

Oh and by the way bumpy side up and smooth side down are the same  ::)

Title: Re: Eggshell Overlay - which way should it go?
Post by: Kit_e_kat9 on August 07, 2012, 04:13:29 PM

Quote from: LJs GU on August 07, 2012, 01:31:25 PM

All we need now is Kit-E to chime in with a 'pussy' inuendo and we've got ourselves the making of an episode...

LOL!!  You can't get near my Pussy with a dust buster (either of them).  They don't like a vacumm either.   I think they prefer a good roll in the dirt ... we don't have sand or hay where we are.    ;D

Just because I can:  lumpy side up.  Ours has a cover over it, so nothing gets near it's errr ummm holes.   :o

Kit_e

Title: Re: Eggshell Overlay - which way should it go?
Post by: Fun Police on August 07, 2012, 05:27:57 PM

Bumpy side up.  It's like being massaged by a lot of tiny........(insert dirty work here)

Title: Re: Eggshell Overlay - which way should it go?
Post by: Mallory Black on August 07, 2012, 06:39:23 PM

think I might keep it clean and go smooth.........

Title: Re: Eggshell Overlay - which way should it go?
Post by: Patr80l on August 07, 2012, 09:41:16 PM

Quote from: gibbo301 on August 07, 2012, 02:47:48 PM

Oh and by the way bumpy side up and smooth side down are the same  ::)

::) 

...and a half full glass is also half empty. Doh.

Title: Re: Eggshell Overlay - which way should it go?
Post by: Eski on August 07, 2012, 10:13:55 PM

Mine is bumpy side up.   It is in the mattress cover with the half of the original foam.

Then I use a fitted sheet over the top so it is easy to keep clean...   :cup:

Title: Re: Eggshell Overlay - which way should it go?
Post by: fuji on August 18, 2012, 06:25:46 AM

According to Clark rubber, bumpy side up but its up to you. Its like Merbau, bumpy side or smooth side, your preference. My tuppence worth