MySwag.org The Off-road Camper Trailer Forum
General => General Discussion => Topic started by: Chippy76 on December 13, 2011, 08:02:13 PM
-
Hey swaggers!
Im sure there was a thread about this somewhere, but I couldnt find it.
What mods and addons have you made to your CT, not the "off the shelf" bolt on stuff (solar panels, water tanks etc) but handy ideas, that you have added to your CT to make camping and travelling a little more pleasant.
Ill kick it off with a handy little "sled" to aid in self recovery of the CT in sand or mud. It can stay in place when travelling, and fold up and out of the way. When needed it can be folded down and used to slide the drawbar out of the sand or mud, without damaging either the jockey wheel or drawbar.
Now .. lets see what you have added!
Cheers Chippy :D
-
Chippy,
Patent that. Bloody awesome idea! :cup:
-
chippy thats a great idea.
I needed a place to put my treadlies and was having a real hard time getting something done then just decided to put this together. And if you were wondering about the strength of it, it held a 100kg bloke right on the tip without drama so 2 bikes should be ok. I will have a back up rope on there to stop the sway too.
-
this is from underneath
cheers
tig
-
Hi,
Check this thread for the mods I have made to my Cub Escape Off Road.
http://myswag.org/forum/index.php?topic=5195.0 (http://myswag.org/forum/index.php?topic=5195.0)
Ray
-
Made a Stitch & Glue kitchen and made an opening in the side of the camper for it
:cheers:
Mike
-
stitch and glue ???
Cheers Chippy :D
-
stitch and glue ???
Cheers Chippy :D
Yep, stitch together with cable ties, to hold it all together while the glue dries.
This is the return bench being built.
:cheers:
-
What glue are you using interested to know ??? :cheers:
-
What glue are you using interested to know ??? :cheers:
On the main box, I used 'Titebond III', then epoxy/fibreglass but on the return I only used epoxy/fibreglass.
It is all 7mm ply beside the pine/jarrah knife block.
:cheers:
-
interesting technique .....
Cheers Chippy :D
-
A mate uses the stitch and glue technique for making timber kayaks and small boats. Once together the whole thing is coated with resin or fibreglass. Aparently a common technique for that sort of thing.
-
wood strip canoes are very common, tho it isnt really the same technique. The strips usually laid to a form and tacked until the glue dries. it is then wrapped with resin and cloth for strength and protection.
Cheers chippy :D
Now back to the mods! :D
-
Stitch and glue boat building seems to be a little different to the wood strip technique. No forms required. http://en.wikipedia.org/wiki/Stitch_and_glue (http://en.wikipedia.org/wiki/Stitch_and_glue)
-
Hey guys ...
(somehow this has turned into a discussion on kayaks and canoes) I had a look at the link that Manjimike sent me, and it is a different technique. Very interesting ....
Cheers Chippy :D
-
Wow , I love that " sled " , where do I go to get one ?
Our bike rack is one of those that fits into a bracket on the tow bar with two short pipes on it , and the bike rack slips into that . So we had two pipes the same , welded onto the tailgate . ( spare tyre is up the front )
Also we have two jerry cans on the front sides of the trailer for water . Instead of ever getting a pump of some sort fitted , we just run irrigation pipe back to a tap beside the number plate , and they gravity feed to that .
-
maybeI should go into production making the recovery sleds ... lol
Cheers Chippy :D
-
maybeI should go into production making the recovery sleds ... lol
Cheers Chippy :D
Methinks you on a winner. :cup:
Betta go out and patent it!
:cheers:
-
maybeI should go into production making the recovery sleds ... lol
Cheers Chippy :D
The 'runners' on the 'sled' add stiffness to the bench as the ply is only 7mm thick.
I still have to cut a long slot in each runner, for hanging the the tea towels on.
Cheers
Mike