MySwag.org The Off-road Camper Trailer Forum
General => General Discussion => Topic started by: Crisp Image on July 24, 2011, 04:31:12 PM
-
After destroying some cheep plastic tubs on our trip I am keen to get some good quality ones with lids.
Something with a max height of about 35cm but not too big in capacity so we can lift them when full.
I did a search and nothing came up (could be using the wrong words or something).
So if you have a source please share it with us.
For me Melbourne would not be out of the question to go to get (only 320km round trip)
Regards
Crisp Image
-
Have you tried Bunnings/ Big hardware stores?
Our local one had heaps of different type and sizes.
Good luck :)
-
if you google "plastic tubs" there are a heap of sellers with a large range of industrial grade tubs and lids. I have bought these for work before for parts storage, they are heaps better than the transparent bunnings variety and are made from a more flexible/durable material that copes with impacts better.
not necessarily cheap though...
-
Maybe Howards Storage World if they are still around
-
Planing a trip here soon myself.
-
Nally tubs, Reflex storage solutions
http://www.reflexequip.com.au/branch_locations.htm
-
Planing a trip here soon myself.
Been there before Dno, so might be worth a trip
-
Officeworks in T'gon has quite a range of brands and sizes up on the back shelf.
-
Have a go at Office works as they are good . Best trick is to stopthem sliding around as you go . the crashing action will destroy most so jam them in tite . For the really tuff stuff try butchers supplies they are really tuff & strong 8)
-
Long way to drive, but they do deliver...
For some reason there link wouldn't work, there got some good Nelly stuff.
-
Hi,
I got some fish crates from Purple Pig that are pretty tough, but they are not quite the right shape to be really usable.
Some el-cheap-oh ones from Chicken Feed are a better shape but are brittle.
One I have found useful, but does not have a lid, are the big floppy bucket bin things, they adapt to almost any shape I want to jam them.
My ultimate aim is to make some from ply wood with solid wood or aluminium angle edges - still contemplating how to make them, but I'm getting a better idea of the size I need from playing around with the other plastic ones.
If I knew exactly what I wanted, I would give Luke at Drifta.com.au a drawing and get him to make them up.
cheers
-
My ultimate aim is to make some from ply wood with solid wood or aluminium angle edges - still contemplating how to make them,
I'm also looking to make my own using ply. I was considering using the stitch and glue method used for making kayaks etc and then fibreglassing all the corners
:cheers:
Mike
-
I'm also looking to make my own using ply. I was considering using the stitch and glue method used for making kayaks etc and then fibreglassing all the corners
:cheers:
Mike
Hi,
that would be good and strong.
I have seen brass box corners on a website somewhere that take the weight of the box on the 4 bottom corners and 'nest' into the 4 corresponding top corners (if you put them on) of the box underneath.
I gather these are used a lot in the music industry for transporting all the amps, cords, speakers, mixers etc that they use.
The other idea I saw and liked, was making the whole box including the top, then cutting the cube where you wanted the lid to start and inserting a locating strip on all 4 sides inside for the lid to close onto. That should make it near dust proof.
cheers
-
The other idea I saw and liked, was making the whole box including the top, then cutting the cube where you wanted the lid to start and inserting a locating strip on all 4 sides inside for the lid to close onto. That should make it near dust proof.
cheers
I would just cut the lid the same size as the external measurements, fit a block into each corner and leave it at that.
The only reason I would fit a lid is to place stuff on top as I would sorting the dust problem elsewhere.
:cheers:
Mike
-
Another option is to use the same method but make it full length on a slide
-
To get a perfect fitting lid make the box as a cube and cut the top off then hinge or pin or what ever method you choose to use. That is how we made boxes at school (many moons ago)
Regards
Crisp Image