MySwag.org The Off-road Camper Trailer Forum
General => General Discussion => Topic started by: krisandkev on January 20, 2011, 02:42:17 PM
-
I have a large steel tool box on the front of our camper, on the draw bar, and it is a Modcon make camper. I am having a lot of trouble with condensation in the tool box! >:( The tool box is sealed, so rain etc does not enter, but the condensation can get really bad. We are just now starting to pack up for our next trip and when I opened the tool box there is mould on our storage bags. (tent pegs, ropes etc and portaloo carry bag) Any suggestions on a quick fix? Would a commercial moisture absorber (Hungry Hippo) work? :angel: :police:
-
sounds like something has been packed away damp.? take everthing out, dry completely and start again, make sure there is no where for water to get in, you will be surprised where it sneaks in..
I packed my guy ropes and storage bag away while it was wet,, boy did i pay for it in the end..
try and get hold of some good sized bags of silica gell..
-
Vinegar gets mould off walls and the like, and occasionally works on fabric. If the box has no leaks, the humidity must be coming from whatever has been place in there. Just dry the contents out as much as you can then when you repack, pack a container of Damp Rid as well - works on closets and whole rooms so it should work in a toolbox.
Eric
-
I got a product at work called superdry, www.superdryers.com They use it in shipping containers and it works really good. Just the other week I had a heap of water go into my car from the rain, I soaked up as much as I could and put one of the 1.4kg superdry's in under the seat. Smell gone in 24hrs, completely dry in 3-4 days. Where you live? I got branched all over Aus. Just chuck one of these in there and no more condensation. You will have to replace every 6 months or so depending where you live and what's in there though..
-
I also get moisture in my tool box from time to time and there wasn't anything wet inside the tool box, it is condensation.
You can try installing a breather/vent, similar to those used when you have a fridge in the tool box. (I am considering doing the same)
They are available from Marine shops.
-
Condensation, to my understanding , is water vapour, and to get water vapour you need water. so therefore, you have a leak or something is damp and has been packed away.. if there is no leak and nothing has been put in there damp, then there is no ............... oh nevermind. ;D
-
Try this, http://www.damprid.com/index0aa6.html. We use it in our shed to stop moisture and mould on all our camping equipment. :D
-
http://www.biasboating.com.au/c-268-vents.aspx
Choose your method of prevention.
-
I also get moisture in my tool box from time to time and there wasn't anything wet inside the tool box, it is condensation.
You can try installing a breather/vent, similar to those used when you have a fridge in the tool box. (I am considering doing the same)
They are available from Marine shops.
I have an aluminium toolbox with a "chimney" type vent and still get condensation forming.
Condensation, to my understanding , is water vapour, and to get water vapour you need water. so therefore, you have a leak or something is damp and has been packed away.. if there is no leak and nothing has been put in there damp, then there is no ............... oh nevermind. ;D
Just wondering if the 98% humidity along with a couple of "rain showers" :o we've had up here recently may have something to do with it. Quite warm & humid of a day, cools a bit at night & condensation forms. ;) Maybe the vent is allowing the moisture into mine anyway. javascript:void(0);
-
It might sound silly but leave the lid a jar so the moisture can escape. if you can. If the camper is in the sun you will get condensation build up inside the tool box. We had hire campers sitting in the sun with tool boxes and just left the lids ajar no problems and we have the tropical heat up here.
Mark
-
Condensation, to my understanding , is water vapour, and to get water vapour you need water. so therefore, you have a leak or something is damp and has been packed away.. if there is no leak and nothing has been put in there damp, then there is no ............... oh nevermind. ;D
X 2
-
Thanks for all replies and suggestions. We don't store any water in the tool box, and the condensation is always under the lid when we open it. We think we will put a vent in as suggested and try some of the damp rid products as well. Thanks to all. Kris and Kev
-
You've got the wrong 4wd !!!!!!! Buy a Patrol and the tool box will get used that often, it won't have a chance to get condensation in it ...... ;D ;D ;D ;D
Don't worry, I don't have a Toyota !!!!!!! ;D ;D
-
It might sound silly but leave the lid a jar so the moisture can escape. if you can.
Mark
X2 We have a Modcon and don't have this problem. I live the lid a jar for that reason and it keeps the seals in better condition.
Dazza
-
just need two different air temps to get condensation
if the box has a full fridge like seal to it when you close it say in the morning or night and its closed during the heat of the day you will get mositure
you can get a suprising amount of moisture from say 200l of air or more in some of the boxes
so you can get moisture in a box thats airtight with nothing moist inside it, need to vent the box but then you get dust and obviously its not water tight for water crossings
-
Buy a box of chalk and put a half a dozen sticks in and when they are damp pull them out and let dry in the sun!